Start line:  
End line:  

Snippet Preview

Snippet HTML Code

Stack Overflow Questions
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns="http://www.w3.org/2001/XMLSchema"
            targetNamespace="http://java.sun.com/xml/ns/javaee"
            xmlns:javaee="http://java.sun.com/xml/ns/javaee"
            xmlns:xsd="http://www.w3.org/2001/XMLSchema"
            elementFormDefault="qualified"
            attributeFormDefault="unqualified"
            version="1.6">
  <xsd:annotation>
    <xsd:documentation>

      DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
      
      Copyright 2003-2009 Sun Microsystems, Inc. All rights reserved.
      
      The contents of this file are subject to the terms of either the
      GNU General Public License Version 2 only ("GPL") or the Common
      Development and Distribution License("CDDL") (collectively, the
      "License").  You may not use this file except in compliance with
      the License. You can obtain a copy of the License at
      https://glassfish.dev.java.net/public/CDDL+GPL.html or
      glassfish/bootstrap/legal/LICENSE.txt.  See the License for the
      specific language governing permissions and limitations under the
      License.
      
      When distributing the software, include this License Header
      Notice in each file and include the License file at
      glassfish/bootstrap/legal/LICENSE.txt.  Sun designates this
      particular file as subject to the "Classpath" exception as
      provided by Sun in the GPL Version 2 section of the License file
      that accompanied this code.  If applicable, add the following
      below the License Header, with the fields enclosed by brackets []
      replaced by your own identifying information:
      "Portions Copyrighted [year] [name of copyright owner]"
      
      Contributor(s):
      
      If you wish your version of this file to be governed by only the
      CDDL or only the GPL Version 2, indicate your decision by adding
      "[Contributor] elects to include this software in this
      distribution under the [CDDL or GPL Version 2] license."  If you
      don't indicate a single choice of license, a recipient has the
      option to distribute your version of this file under either the
      CDDL, the GPL Version 2 or to extend the choice of license to its
      licensees as provided above.  However, if you add GPL Version 2
      code and therefore, elected the GPL Version 2 license, then the
      option applies only if the new code is made subject to such
      option by the copyright holder.
      
    </xsd:documentation>
  </xsd:annotation>

  <xsd:annotation>
    <xsd:documentation>

      DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
      
      Copyright 2003-2009 Sun Microsystems, Inc. All rights reserved.
      
      The contents of this file are subject to the terms of either the
      GNU General Public License Version 2 only ("GPL") or the Common
      Development and Distribution License("CDDL") (collectively, the
      "License").  You may not use this file except in compliance with
      the License. You can obtain a copy of the License at
      https://glassfish.dev.java.net/public/CDDL+GPL.html or
      glassfish/bootstrap/legal/LICENSE.txt.  See the License for the
      specific language governing permissions and limitations under the
      License.
      
      When distributing the software, include this License Header
      Notice in each file and include the License file at
      glassfish/bootstrap/legal/LICENSE.txt.  Sun designates this
      particular file as subject to the "Classpath" exception as
      provided by Sun in the GPL Version 2 section of the License file
      that accompanied this code.  If applicable, add the following
      below the License Header, with the fields enclosed by brackets []
      replaced by your own identifying information:
      "Portions Copyrighted [year] [name of copyright owner]"
      
      Contributor(s):
      
      If you wish your version of this file to be governed by only the
      CDDL or only the GPL Version 2, indicate your decision by adding
      "[Contributor] elects to include this software in this
      distribution under the [CDDL or GPL Version 2] license."  If you
      don't indicate a single choice of license, a recipient has the
      option to distribute your version of this file under either the
      CDDL, the GPL Version 2 or to extend the choice of license to its
      licensees as provided above.  However, if you add GPL Version 2
      code and therefore, elected the GPL Version 2 license, then the
      option applies only if the new code is made subject to such
      option by the copyright holder.
      
    </xsd:documentation>
  </xsd:annotation>

  <xsd:annotation>
    <xsd:documentation>
      <![CDATA[[
      This is the XML Schema for the Connector 1.6 deployment
      descriptor.  The deployment descriptor must be named
      "META-INF/ra.xml" in the connector's rar file.  All Connector
      deployment descriptors must indicate the connector resource
      adapter schema by using the Java EE namespace:
      
      http://java.sun.com/xml/ns/javaee
      
      and by indicating the version of the schema by
      using the version element as shown below:
      
      <connector xmlns="http://java.sun.com/xml/ns/javaee"
      xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
      xsi:schemaLocation="http://java.sun.com/xml/ns/javaee
      	 http://java.sun.com/xml/ns/javaee/connector_1_6.xsd"
      version="1.6">
      ...
      </connector>
      
      The instance documents may indicate the published version of
      the schema using the xsi:schemaLocation attribute for Java EE
      namespace with the following location:
      
      http://java.sun.com/xml/ns/javaee/connector_1_6.xsd
      
      ]]>
    </xsd:documentation>
  </xsd:annotation>

  <xsd:annotation>
    <xsd:documentation>

      The following conventions apply to all Java EE
      deployment descriptor elements unless indicated otherwise.
      
      - In elements that specify a pathname to a file within the
      same JAR file, relative filenames (i.e., those not
      starting with "/") are considered relative to the root of
      the JAR file's namespace.  Absolute filenames (i.e., those
      starting with "/") also specify names in the root of the
      JAR file's namespace.  In general, relative names are
      preferred.  The exception is .war files where absolute
      names are preferred for consistency with the Servlet API.
      
    </xsd:documentation>
  </xsd:annotation>

  <xsd:include schemaLocation="javaee_6.xsd"/>


<!-- **************************************************** -->

  <xsd:element name="connector"
               type="javaee:connectorType">
    <xsd:annotation>
      <xsd:documentation>

        The connector element is the root element of the deployment
        descriptor for the resource adapter. This element includes
        general information - vendor name, resource adapter version,
        icon - about the resource adapter module. It also includes
        information specific to the implementation of the resource
        adapter library as specified through the element
        resourceadapter.
        
      </xsd:documentation>
    </xsd:annotation>
  </xsd:element>


<!-- **************************************************** -->

  <xsd:complexType name="activationspecType">
    <xsd:annotation>
      <xsd:documentation>

        The activationspecType specifies an activation
        specification.  The information includes fully qualified
        Java class name of an activation specification and a set of
        required configuration property names.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="activationspec-class"
                   type="javaee:fully-qualified-classType">
        <xsd:annotation>
          <xsd:documentation>
            <![CDATA[[
            The element activationspec-class specifies the fully
            qualified Java class name of the activation
            specification class. This class must implement the
            javax.resource.spi.ActivationSpec interface. The
            implementation of this class is required to be a
            JavaBean.
            
            Example:
            	  <activationspec-class>com.wombat.ActivationSpecImpl
            	  </activationspec-class>
            
            ]]>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="required-config-property"
                   type="javaee:required-config-propertyType"
                   minOccurs="0"
                   maxOccurs="unbounded">
        <xsd:annotation>
          <xsd:documentation>

            The required-config-property element is deprecated since
            Connectors 1.6 specification. The resource adapter 
            implementation is recommended to use the @NotNull
            Bean Validation annotation or its XML validation
            descriptor equivalent to indicate that a configuration
            property is required to be specified by the deployer.
            See the Connectors specification for more information. 
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="config-property"
                   type="javaee:config-propertyType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="adminobjectType">
    <xsd:annotation>
      <xsd:documentation>

        The adminobjectType specifies information about an
        administered object.  Administered objects are specific to a
        messaging style or message provider.  This contains
        information on the Java type of the interface implemented by
        an administered object, its Java class name and its
        configuration properties.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="adminobject-interface"
                   type="javaee:fully-qualified-classType">
        <xsd:annotation>
          <xsd:documentation>
            <![CDATA[[
            The element adminobject-interface specifies the
            fully qualified name of the Java type of the
            interface implemented by an administered object.
            
            Example:
            	<adminobject-interface>javax.jms.Destination
            	</adminobject-interface>
            
            ]]>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="adminobject-class"
                   type="javaee:fully-qualified-classType">
        <xsd:annotation>
          <xsd:documentation>
            <![CDATA[[
            The element adminobject-class specifies the fully
            qualified Java class name of an administered object.
            
            Example:
            	  <adminobject-class>com.wombat.DestinationImpl
            	  </adminobject-class>
            
            ]]>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="config-property"
                   type="javaee:config-propertyType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="authentication-mechanismType">
    <xsd:annotation>
      <xsd:documentation>

        The authentication-mechanismType specifies an authentication
        mechanism supported by the resource adapter. Note that this
        support is for the resource adapter and not for the
        underlying EIS instance. The optional description specifies
        any resource adapter specific requirement for the support of
        security contract and authentication mechanism.
        
        Note that BasicPassword mechanism type should support the
        javax.resource.spi.security.PasswordCredential interface.
        The Kerbv5 mechanism type should support the
        org.ietf.jgss.GSSCredential interface or the deprecated
        javax.resource.spi.security.GenericCredential interface.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="authentication-mechanism-type"
                   type="javaee:xsdStringType">
        <xsd:annotation>
          <xsd:documentation>
            <![CDATA[[
            The element authentication-mechanism-type specifies
            type of an authentication mechanism.
            
            The example values are:
            
            <authentication-mechanism-type>BasicPassword
            </authentication-mechanism-type>
            
            <authentication-mechanism-type>Kerbv5
            </authentication-mechanism-type>
            
            Any additional security mechanisms are outside the
            scope of the Connector architecture specification.
            
            ]]>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="credential-interface"
                   type="javaee:credential-interfaceType"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="config-property-nameType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The config-property-nameType contains the name of a
        configuration property.
        
        The connector architecture defines a set of well-defined
        properties all of type java.lang.String. These are as
        follows.
        
        ServerName
        PortNumber
        UserName
        Password
        ConnectionURL
        
        A resource adapter provider can extend this property set to
        include properties specific to the resource adapter and its
        underlying EIS.
        
        Possible values include
        	  ServerName
        	  PortNumber
        	  UserName
        	  Password
        	  ConnectionURL
        
        Example: <config-property-name>ServerName</config-property-name>
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:xsdStringType"/>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="config-property-typeType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The config-property-typeType contains the fully
        qualified Java type of a configuration property.
        
        The following are the legal values:
        java.lang.Boolean, java.lang.String, java.lang.Integer,
        java.lang.Double, java.lang.Byte, java.lang.Short,
        java.lang.Long, java.lang.Float, java.lang.Character
        
        Used in: config-property
        
        Example:
        <config-property-type>java.lang.String</config-property-type>
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:enumeration value="java.lang.Boolean"/>
        <xsd:enumeration value="java.lang.String"/>
        <xsd:enumeration value="java.lang.Integer"/>
        <xsd:enumeration value="java.lang.Double"/>
        <xsd:enumeration value="java.lang.Byte"/>
        <xsd:enumeration value="java.lang.Short"/>
        <xsd:enumeration value="java.lang.Long"/>
        <xsd:enumeration value="java.lang.Float"/>
        <xsd:enumeration value="java.lang.Character"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="config-propertyType">
    <xsd:annotation>
      <xsd:documentation>

        The config-propertyType contains a declaration of a single
        configuration property that may be used for providing
        configuration information.
        
        The declaration consists of an optional description, name,
        type and an optional value of the configuration property. If
        the resource adapter provider does not specify a value than
        the deployer is responsible for providing a valid value for
        a configuration property.
        
        Any bounds or well-defined values of properties should be
        described in the description element.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="config-property-name"
                   type="javaee:config-property-nameType"/>
      <xsd:element name="config-property-type"
                   type="javaee:config-property-typeType"/>
      <xsd:element name="config-property-value"
                   type="javaee:xsdStringType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>
            <![CDATA[[
            The element config-property-value contains the value
            of a configuration entry. Note, it is possible for a
            resource adapter deployer to override this
            configuration information during deployment.
            
            Example:
            <config-property-value>WombatServer</config-property-value>
            
            ]]>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="config-property-ignore"
                   type="javaee:true-falseType"
                   minOccurs="0"
                   maxOccurs="1">
        <xsd:annotation>
          <xsd:documentation>

            The element config-property-ignore is used to specify 
            whether the configuration tools must ignore considering the 
            configuration property during auto-discovery of
            Configuration properties. See the Connector specification for
            more details. If unspecified, the container must not ignore
            the configuration property during auto-discovery.
            This element must be one of the following, "true" or "false".
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="config-property-supports-dynamic-updates"
                   type="javaee:true-falseType"
                   minOccurs="0"
                   maxOccurs="1">
        <xsd:annotation>
          <xsd:documentation>

            The element config-property-supports-dynamic-updates is used to specify 
            whether the configuration property allows its value to be updated, by
            application server's configuration tools, during the lifetime of
            the JavaBean instance. See the Connector specification for
            more details. If unspecified, the container must not dynamically
            reconfigure the property.
            This element must be one of the following, "true" or "false".
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="config-property-confidential"
                   type="javaee:true-falseType"
                   minOccurs="0"
                   maxOccurs="1">
        <xsd:annotation>
          <xsd:documentation>

            The element config-property-confidential is used to specify 
            whether the configuration property is confidential and
            recommends application server's configuration tools to use special 
            visual aids for editing them. See the Connector specification for
            more details. If unspecified, the container must not treat the
            property as confidential.
            This element must be one of the following, "true" or "false".
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="connection-definitionType">
    <xsd:annotation>
      <xsd:documentation>

        The connection-definitionType defines a set of connection
        interfaces and classes pertaining to a particular connection
        type. This also includes configurable properties for
        ManagedConnectionFactory instances that may be produced out
        of this set.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="managedconnectionfactory-class"
                   type="javaee:fully-qualified-classType">
        <xsd:annotation>
          <xsd:documentation>
            <![CDATA[[
            The element managedconnectionfactory-class specifies
            the fully qualified name of the Java class that
            implements the
            javax.resource.spi.ManagedConnectionFactory interface.
            This Java class is provided as part of resource
            adapter's implementation of connector architecture
            specified contracts. The implementation of this
            class is required to be a JavaBean.
            
            Example:
            <managedconnectionfactory-class>
            	  com.wombat.ManagedConnectionFactoryImpl
            </managedconnectionfactory-class>
            
            ]]>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="config-property"
                   type="javaee:config-propertyType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="connectionfactory-interface"
                   type="javaee:fully-qualified-classType">
        <xsd:annotation>
          <xsd:documentation>
            <![CDATA[[
            The element connectionfactory-interface specifies
            the fully qualified name of the ConnectionFactory
            interface supported by the resource adapter.
            
            Example:
            <connectionfactory-interface>com.wombat.ConnectionFactory
            </connectionfactory-interface>
            
            OR
            
            <connectionfactory-interface>javax.resource.cci.ConnectionFactory
            </connectionfactory-interface>
            
            ]]>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="connectionfactory-impl-class"
                   type="javaee:fully-qualified-classType">
        <xsd:annotation>
          <xsd:documentation>
            <![CDATA[[
            The element connectionfactory-impl-class specifies
            the fully qualified name of the ConnectionFactory
            class that implements resource adapter
            specific ConnectionFactory interface.
            
            Example:
            
            <connectionfactory-impl-class>com.wombat.ConnectionFactoryImpl
            </connectionfactory-impl-class>
            
            ]]>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="connection-interface"
                   type="javaee:fully-qualified-classType">
        <xsd:annotation>
          <xsd:documentation>
            <![CDATA[[
            The connection-interface element specifies the fully
            qualified name of the Connection interface supported
            by the resource adapter.
            
            Example:
            
            	  <connection-interface>javax.resource.cci.Connection
            	  </connection-interface>
            
            ]]>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="connection-impl-class"
                   type="javaee:fully-qualified-classType">
        <xsd:annotation>
          <xsd:documentation>
            <![CDATA[[
            The connection-impl-classType specifies the fully
            qualified name of the Connection class that
            implements resource adapter specific Connection
            interface.  It is used by the connection-impl-class
            elements.
            
            Example:
            
            	  <connection-impl-class>com.wombat.ConnectionImpl
            	  </connection-impl-class>
            
            ]]>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="connectorType">
    <xsd:annotation>
      <xsd:documentation>

        The connectorType defines a resource adapter.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="module-name"
                   type="javaee:string"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The element module-name specifies the name of the
            resource adapter.
            
            If there is no module-name specified, the module-name
            is determined as defined in Section EE.8.1.1 and EE.8.1.2 
            of the Java Platform, Enterprise Edition (Java EE) 
            Specification, version 6.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:group ref="javaee:descriptionGroup"/>
      <xsd:element name="vendor-name"
                   type="javaee:xsdStringType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The element vendor-name specifies the name of
            resource adapter provider vendor.
            
            If there is no vendor-name specified, the application 
            server must consider the default "" (empty string) as
            the name of the resource adapter provider vendor.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="eis-type"
                   type="javaee:xsdStringType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The element eis-type contains information about the
            type of the EIS. For example, the type of an EIS can
            be product name of EIS independent of any version
            info.
            
            This helps in identifying EIS instances that can be
            used with this resource adapter.
            
            If there is no eis-type specified, the application 
            server must consider the default "" (empty string) as
            the type of the EIS.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="resourceadapter-version"
                   type="javaee:xsdStringType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The element resourceadapter-version specifies a string-based version
            of the resource adapter from the resource adapter
            provider.
            
            If there is no resourceadapter-version specified, the application 
            server must consider the default "" (empty string) as
            the version of the resource adapter.
            	
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="license"
                   type="javaee:licenseType"
                   minOccurs="0"/>
      <xsd:element name="resourceadapter"
                   type="javaee:resourceadapterType"/>
      <xsd:element name="required-work-context"
                   type="javaee:fully-qualified-classType"
                   minOccurs="0"
                   maxOccurs="unbounded">
        <xsd:annotation>
          <xsd:documentation>

            The element required-work-context specifies a fully qualified class 
            name that implements WorkContext interface, that the resource adapter 
            requires the application server to support.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="version"
                   type="javaee:dewey-versionType"
                   fixed="1.6"
                   use="required">
      <xsd:annotation>
        <xsd:documentation>

          The version indicates the version of the schema to be used by the
          deployment tool. This element doesn't have a default, and the resource adapter 
          developer/deployer is required to specify it. The element allows the deployment 
          tool to choose which schema to validate the descriptor against.
          	  
          
        </xsd:documentation>
      </xsd:annotation>
    </xsd:attribute>
    <xsd:attribute name="metadata-complete"
                   type="xsd:boolean">
      <xsd:annotation>
        <xsd:documentation>

          The metadata-complete attribute defines whether the deployment 
          descriptor for the resource adapter module is complete, or whether
          the class files available to the module and packaged with the resource 
          adapter should be examined for annotations that specify deployment 
          information.
          
          If metadata-complete is set to "true", the deployment tool of the 
          application server must ignore any annotations that specify deployment 
          information, which might be present in the class files of the 
          application.If metadata-complete is not specified or is set to "false", 
          the deployment tool must examine the class files of the application for 
          annotations, as specified by this specification. If the 
          deployment descriptor is not included or is included but not marked 
          metadata-complete, the deployment tool will process annotations.
          
          Application servers must assume that metadata-complete is true for 
          resource adapter modules with deployment descriptor version 
          lower than 1.6.
          		
        </xsd:documentation>
      </xsd:annotation>
    </xsd:attribute>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="credential-interfaceType">
    <xsd:annotation>
      <xsd:documentation>

        The credential-interfaceType specifies the
        interface that the resource adapter implementation
        supports for the representation of the
        credentials. This element(s) that use this type,
        i.e. credential-interface,  should be used by
        application server to find out the Credential
        interface it should use as part of the security
        contract.
        
        The possible values are:
        
        javax.resource.spi.security.PasswordCredential
        org.ietf.jgss.GSSCredential
        javax.resource.spi.security.GenericCredential
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:fully-qualified-classType">
        <xsd:enumeration value="javax.resource.spi.security.PasswordCredential"/>
        <xsd:enumeration value="org.ietf.jgss.GSSCredential"/>
        <xsd:enumeration value="javax.resource.spi.security.GenericCredential"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="inbound-resourceadapterType">
    <xsd:annotation>
      <xsd:documentation>

        The inbound-resourceadapterType specifies information
        about an inbound resource adapter. This contains information
        specific to the implementation of the resource adapter
        library as specified through the messageadapter element.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="messageadapter"
                   type="javaee:messageadapterType"
                   minOccurs="0">
        <xsd:unique name="messagelistener-type-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The messagelistener-type element content must be
              unique in the messageadapter. Several messagelisteners
              can not use the same messagelistener-type.
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:messagelistener"/>
          <xsd:field xpath="javaee:messagelistener-type"/>
        </xsd:unique>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="licenseType">
    <xsd:annotation>
      <xsd:documentation>

        The licenseType specifies licensing requirements for the
        resource adapter module. This type specifies whether a
        license is required to deploy and use this resource adapter,
        and an optional description of the licensing terms
        (examples: duration of license, number of connection
        restrictions). It is used by the license element.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="license-required"
                   type="javaee:true-falseType">
        <xsd:annotation>
          <xsd:documentation>

            The element license-required specifies whether a
            license is required to deploy and use the
            resource adapter. This element must be one of
            the following, "true" or "false".
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="messageadapterType">
    <xsd:annotation>
      <xsd:documentation>

        The messageadapterType specifies information about the
        messaging capabilities of the resource adapter. This
        contains information specific to the implementation of the
        resource adapter library as specified through the
        messagelistener element.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="messagelistener"
                   type="javaee:messagelistenerType"
                   maxOccurs="unbounded"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="messagelistenerType">
    <xsd:annotation>
      <xsd:documentation>

        The messagelistenerType specifies information about a
        specific message listener supported by the messaging
        resource adapter. It contains information on the Java type
        of the message listener interface and an activation
        specification.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="messagelistener-type"
                   type="javaee:fully-qualified-classType">
        <xsd:annotation>
          <xsd:documentation>
            <![CDATA[[
            The element messagelistener-type specifies the fully
            qualified name of the Java type of a message
            listener interface.
            
            Example:
            
            	<messagelistener-type>javax.jms.MessageListener
            	</messagelistener-type>
            
            ]]>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="activationspec"
                   type="javaee:activationspecType"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="outbound-resourceadapterType">
    <xsd:annotation>
      <xsd:documentation>

        The outbound-resourceadapterType specifies information about
        an outbound resource adapter. The information includes fully
        qualified names of classes/interfaces required as part of
        the connector architecture specified contracts for
        connection management, level of transaction support
        provided, one or more authentication mechanisms supported
        and additional required security permissions.
        
        If any of the outbound resource adapter elements (transaction-support,
        authentication-mechanism, reauthentication-support) is specified through
        this element or metadata annotations, and no  connection-definition is 
        specified as part of this element or through annotations, the 
        application server must consider this an error and fail deployment. 
        
        If there is no authentication-mechanism specified as part of
        this element or metadata annotations, then the resource adapter does 
        not support any standard security authentication mechanisms as 
        part of security contract. The application server ignores the security 
        part of the system contracts in this case.
        
        If there is no transaction-support specified as part of this element 
        or metadata annotation, then the application server must consider that 
        the resource adapter does not support either the resource manager local 
        or JTA transactions and must consider the transaction support as 
        NoTransaction. Note that resource adapters may specify the level of 
        transaction support to be used at runtime for a ManagedConnectionFactory 
        through the TransactionSupport interface.
        
        If there is no reauthentication-support specified as part of
        this element or metadata annotation, then the application server must consider 
        that the resource adapter does not support re-authentication of 
        ManagedConnections.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="connection-definition"
                   type="javaee:connection-definitionType"
                   maxOccurs="unbounded"
                   minOccurs="0"/>
      <xsd:element name="transaction-support"
                   type="javaee:transaction-supportType"
                   minOccurs="0"/>
      <xsd:element name="authentication-mechanism"
                   type="javaee:authentication-mechanismType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="reauthentication-support"
                   type="javaee:true-falseType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            	    The element reauthentication-support specifies
            	    whether the resource adapter implementation supports
            	    re-authentication of existing Managed- Connection
            	    instance. Note that this information is for the
            	    resource adapter implementation and not for the
            	    underlying EIS instance. This element must have
            	    either a "true" or "false" value.
            
            	  
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="required-config-propertyType">
    <xsd:annotation>
      <xsd:documentation>
        <![CDATA[[
        The required-config-propertyType contains a declaration
        of a single configuration property used for specifying a
        required configuration property name. It is used
        by required-config-property elements.
        
        Usage of this type is deprecated from Connectors 1.6 specification. 
        Refer to required-config-property element for more information.
        
        Example:
        
        <required-config-property>
        <config-property-name>Destination</config-property-name>
        </required-config-property>
        
        ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="config-property-name"
                   type="javaee:config-property-nameType"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="resourceadapterType">
    <xsd:annotation>
      <xsd:documentation>

        The resourceadapterType specifies information about the
        resource adapter. The information includes fully qualified
        resource adapter Java class name, configuration properties,
        information specific to the implementation of the resource
        adapter library as specified through the
        outbound-resourceadapter and inbound-resourceadapter
        elements, and an optional set of administered objects.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="resourceadapter-class"
                   type="javaee:fully-qualified-classType"
                   minOccurs="0">
        <xsd:annotation>
          <xsd:documentation>

            The element resourceadapter-class specifies the
            fully qualified name of a Java class that implements
            the javax.resource.spi.ResourceAdapter
            interface. This Java class is provided as part of
            resource adapter's implementation of connector
            architecture specified contracts. The implementation
            of this class is required to be a JavaBean.
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="config-property"
                   type="javaee:config-propertyType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="outbound-resourceadapter"
                   type="javaee:outbound-resourceadapterType"
                   minOccurs="0">
        <xsd:unique name="connectionfactory-interface-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The connectionfactory-interface element content
              must be unique in the outbound-resourceadapter.
              Multiple connection-definitions can not use the
              same connectionfactory-type.
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:connection-definition"/>
          <xsd:field xpath="javaee:connectionfactory-interface"/>
        </xsd:unique>
      </xsd:element>
      <xsd:element name="inbound-resourceadapter"
                   type="javaee:inbound-resourceadapterType"
                   minOccurs="0"/>
      <xsd:element name="adminobject"
                   type="javaee:adminobjectType"
                   minOccurs="0"
                   maxOccurs="unbounded">
        <xsd:unique name="adminobject-type-uniqueness">
          <xsd:annotation>
            <xsd:documentation>

              The adminobject-interface and adminobject-class element content must be
              unique in the resourceadapterType. Several admin objects
              can not use the same adminobject-interface and adminobject-class.
              
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:adminobject"/>
          <xsd:field xpath="javaee:adminobject-interface"/>
          <xsd:field xpath="javaee:adminobject-class"/>
        </xsd:unique>
      </xsd:element>
      <xsd:element name="security-permission"
                   type="javaee:security-permissionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="security-permissionType">
    <xsd:annotation>
      <xsd:documentation>

        The security-permissionType specifies a security
        permission that is required by the resource adapter code.
        
        The security permission listed in the deployment descriptor
        are ones that are different from those required by the
        default permission set as specified in the connector
        specification. The optional description can mention specific
        reason that resource adapter requires a given security
        permission.
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="unbounded"/>
      <xsd:element name="security-permission-spec"
                   type="javaee:xsdStringType">
        <xsd:annotation>
          <xsd:documentation>

            The element security-permission-spec specifies a security
            permission based on the Security policy file
            syntax. Refer to the following URL for Sun's
            implementation of the security permission
            specification:
            
            http://java.sun.com/javase/6/docs/technotes/guides/security/PolicyFiles.html
            
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="transaction-supportType">
    <xsd:annotation>
      <xsd:documentation>

        The transaction-supportType specifies the level of
        transaction support provided by the resource adapter. It is
        used by transaction-support elements.
        
        The value must be one of the following:
        
        NoTransaction
        LocalTransaction
        XATransaction
        
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string">
        <xsd:enumeration value="NoTransaction"/>
        <xsd:enumeration value="LocalTransaction"/>
        <xsd:enumeration value="XATransaction"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>

</xsd:schema>
New to GrepCode? Check out our FAQ X