Start line:  
End line:  

Snippet Preview

Snippet HTML Code

Stack Overflow Questions
   /*
    * Copyright 2010-2015 Amazon.com, Inc. or its affiliates. All Rights Reserved.
    * 
    * Licensed under the Apache License, Version 2.0 (the "License").
    * You may not use this file except in compliance with the License.
    * A copy of the License is located at
    * 
    *  http://aws.amazon.com/apache2.0
    * 
   * or in the "license" file accompanying this file. This file is distributed
   * on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
   * express or implied. See the License for the specific language governing
   * permissions and limitations under the License.
   */
  package com.amazonaws.services.simpleworkflow.model;
  

Provides details of the ContinueAsNewWorkflowExecution decision.

Access Control

You can use IAM policies to control this decision's access to Amazon SWF resources as follows:

  • Use a Resource element with the domain name to limit the action to only specified domains.
  • Use an Action element to allow or deny permission to call this action.
  • Constrain the following parameters by using a Condition element with the appropriate keys.
    • tag : Optional. . A tag used to identify the workflow execution
    • taskList : String constraint. The key is swf:taskList.name .
    • workflowType.version : String constraint. The key is swf:workflowType.version .

If the caller does not have sufficient permissions to invoke the action, or the parameter values fall outside the specified constraints, the action fails. The associated event attribute's cause parameter will be set to OPERATION_NOT_PERMITTED. For details and example IAM policies, see Using IAM to Manage Access to Amazon SWF Workflows .

  
The input provided to the new workflow execution.

Constraints:
Length: 0 - 32768

  
      private String input;

    
If set, specifies the total duration for this workflow execution. This overrides the defaultExecutionStartToCloseTimeout specified when registering the workflow type.

The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to specify unlimited duration. <note>An execution start-to-close timeout for this workflow execution must be specified either as a default for the workflow type or through this field. If neither this field is set nor a default execution start-to-close timeout was specified at registration time then a fault will be returned.</note>

Constraints:
Length: 0 - 8

  
      private String executionStartToCloseTimeout;

    
Represents a task list.
  
      private TaskList taskList;

    
Optional. The task priority that, if set, specifies the priority for the decision tasks for this workflow execution. This overrides the defaultTaskPriority specified when registering the workflow type. Valid values are integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647). Higher numbers indicate higher priority.

For more information about setting task priority, see Setting Task Priority in the Amazon Simple Workflow Developer Guide.

Constraints:
Length: 0 - 11

 
     private String taskPriority;

    
Specifies the maximum duration of decision tasks for the new workflow execution. This parameter overrides the defaultTaskStartToCloseTimout specified when registering the workflow type using RegisterWorkflowType.

The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to specify unlimited duration. <note>A task start-to-close timeout for the new workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task start-to-close timeout was specified at registration time then a fault will be returned.</note>

Constraints:
Length: 0 - 8

 
     private String taskStartToCloseTimeout;

    
If set, specifies the policy to use for the child workflow executions of the new execution if it is terminated by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using RegisterWorkflowType.

The supported child policies are:

  • TERMINATE: the child executions will be terminated.
  • REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.
  • ABANDON: no action will be taken. The child executions will continue to run.
<note>A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault will be returned.</note>

Constraints:
Allowed Values: TERMINATE, REQUEST_CANCEL, ABANDON

 
     private String childPolicy;

    
The list of tags to associate with the new workflow execution. A maximum of 5 tags can be specified. You can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or ListClosedWorkflowExecutions and specifying a TagFilter.

Constraints:
Length: 0 - 5

 
 
     private String workflowTypeVersion;

    
The input provided to the new workflow execution.

Constraints:
Length: 0 - 32768

Returns:
The input provided to the new workflow execution.
 
     public String getInput() {
         return ;
     }
    
    
The input provided to the new workflow execution.

Constraints:
Length: 0 - 32768

Parameters:
input The input provided to the new workflow execution.
 
     public void setInput(String input) {
         this. = input;
     }
    
    
The input provided to the new workflow execution.

Returns a reference to this object so that method calls can be chained together.

Constraints:
Length: 0 - 32768

Parameters:
input The input provided to the new workflow execution.
Returns:
A reference to this updated object so that method calls can be chained together.
 
         this. = input;
         return this;
     }

    
If set, specifies the total duration for this workflow execution. This overrides the defaultExecutionStartToCloseTimeout specified when registering the workflow type.

The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to specify unlimited duration. <note>An execution start-to-close timeout for this workflow execution must be specified either as a default for the workflow type or through this field. If neither this field is set nor a default execution start-to-close timeout was specified at registration time then a fault will be returned.</note>

Constraints:
Length: 0 - 8

Returns:
If set, specifies the total duration for this workflow execution. This overrides the defaultExecutionStartToCloseTimeout specified when registering the workflow type.

The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to specify unlimited duration. <note>An execution start-to-close timeout for this workflow execution must be specified either as a default for the workflow type or through this field. If neither this field is set nor a default execution start-to-close timeout was specified at registration time then a fault will be returned.</note>

 
         return ;
     }
    
    
If set, specifies the total duration for this workflow execution. This overrides the defaultExecutionStartToCloseTimeout specified when registering the workflow type.

The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to specify unlimited duration. <note>An execution start-to-close timeout for this workflow execution must be specified either as a default for the workflow type or through this field. If neither this field is set nor a default execution start-to-close timeout was specified at registration time then a fault will be returned.</note>

Constraints:
Length: 0 - 8

Parameters:
executionStartToCloseTimeout If set, specifies the total duration for this workflow execution. This overrides the defaultExecutionStartToCloseTimeout specified when registering the workflow type.

The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to specify unlimited duration. <note>An execution start-to-close timeout for this workflow execution must be specified either as a default for the workflow type or through this field. If neither this field is set nor a default execution start-to-close timeout was specified at registration time then a fault will be returned.</note>

 
     public void setExecutionStartToCloseTimeout(String executionStartToCloseTimeout) {
         this. = executionStartToCloseTimeout;
     }
    
    
If set, specifies the total duration for this workflow execution. This overrides the defaultExecutionStartToCloseTimeout specified when registering the workflow type.

The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to specify unlimited duration. <note>An execution start-to-close timeout for this workflow execution must be specified either as a default for the workflow type or through this field. If neither this field is set nor a default execution start-to-close timeout was specified at registration time then a fault will be returned.</note>

Returns a reference to this object so that method calls can be chained together.

Constraints:
Length: 0 - 8

Parameters:
executionStartToCloseTimeout If set, specifies the total duration for this workflow execution. This overrides the defaultExecutionStartToCloseTimeout specified when registering the workflow type.

The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to specify unlimited duration. <note>An execution start-to-close timeout for this workflow execution must be specified either as a default for the workflow type or through this field. If neither this field is set nor a default execution start-to-close timeout was specified at registration time then a fault will be returned.</note>

Returns:
A reference to this updated object so that method calls can be chained together.
 
         this. = executionStartToCloseTimeout;
         return this;
     }

    
Represents a task list.

Returns:
Represents a task list.
 
     public TaskList getTaskList() {
         return ;
     }
    
    
Represents a task list.

Parameters:
taskList Represents a task list.
 
     public void setTaskList(TaskList taskList) {
         this. = taskList;
     }
    
    
Represents a task list.

Returns a reference to this object so that method calls can be chained together.

Parameters:
taskList Represents a task list.
Returns:
A reference to this updated object so that method calls can be chained together.
 
         this. = taskList;
         return this;
     }

    
Optional. The task priority that, if set, specifies the priority for the decision tasks for this workflow execution. This overrides the defaultTaskPriority specified when registering the workflow type. Valid values are integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647). Higher numbers indicate higher priority.

For more information about setting task priority, see Setting Task Priority in the Amazon Simple Workflow Developer Guide.

Constraints:
Length: 0 - 11

Returns:
Optional. The task priority that, if set, specifies the priority for the decision tasks for this workflow execution. This overrides the defaultTaskPriority specified when registering the workflow type. Valid values are integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647). Higher numbers indicate higher priority.

For more information about setting task priority, see Setting Task Priority in the Amazon Simple Workflow Developer Guide.

 
     public String getTaskPriority() {
         return ;
     }
    
    
Optional. The task priority that, if set, specifies the priority for the decision tasks for this workflow execution. This overrides the defaultTaskPriority specified when registering the workflow type. Valid values are integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647). Higher numbers indicate higher priority.

For more information about setting task priority, see Setting Task Priority in the Amazon Simple Workflow Developer Guide.

Constraints:
Length: 0 - 11

Parameters:
taskPriority Optional. The task priority that, if set, specifies the priority for the decision tasks for this workflow execution. This overrides the defaultTaskPriority specified when registering the workflow type. Valid values are integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647). Higher numbers indicate higher priority.

For more information about setting task priority, see Setting Task Priority in the Amazon Simple Workflow Developer Guide.

 
     public void setTaskPriority(String taskPriority) {
         this. = taskPriority;
     }
    
    
Optional. The task priority that, if set, specifies the priority for the decision tasks for this workflow execution. This overrides the defaultTaskPriority specified when registering the workflow type. Valid values are integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647). Higher numbers indicate higher priority.

For more information about setting task priority, see Setting Task Priority in the Amazon Simple Workflow Developer Guide.

Returns a reference to this object so that method calls can be chained together.

Constraints:
Length: 0 - 11

Parameters:
taskPriority Optional. The task priority that, if set, specifies the priority for the decision tasks for this workflow execution. This overrides the defaultTaskPriority specified when registering the workflow type. Valid values are integers that range from Java's Integer.MIN_VALUE (-2147483648) to Integer.MAX_VALUE (2147483647). Higher numbers indicate higher priority.

For more information about setting task priority, see Setting Task Priority in the Amazon Simple Workflow Developer Guide.

Returns:
A reference to this updated object so that method calls can be chained together.
 
         this. = taskPriority;
         return this;
     }

    
Specifies the maximum duration of decision tasks for the new workflow execution. This parameter overrides the defaultTaskStartToCloseTimout specified when registering the workflow type using RegisterWorkflowType.

The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to specify unlimited duration. <note>A task start-to-close timeout for the new workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task start-to-close timeout was specified at registration time then a fault will be returned.</note>

Constraints:
Length: 0 - 8

Returns:
Specifies the maximum duration of decision tasks for the new workflow execution. This parameter overrides the defaultTaskStartToCloseTimout specified when registering the workflow type using RegisterWorkflowType.

The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to specify unlimited duration. <note>A task start-to-close timeout for the new workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task start-to-close timeout was specified at registration time then a fault will be returned.</note>

 
     public String getTaskStartToCloseTimeout() {
         return ;
     }
    
    
Specifies the maximum duration of decision tasks for the new workflow execution. This parameter overrides the defaultTaskStartToCloseTimout specified when registering the workflow type using RegisterWorkflowType.

The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to specify unlimited duration. <note>A task start-to-close timeout for the new workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task start-to-close timeout was specified at registration time then a fault will be returned.</note>

Constraints:
Length: 0 - 8

Parameters:
taskStartToCloseTimeout Specifies the maximum duration of decision tasks for the new workflow execution. This parameter overrides the defaultTaskStartToCloseTimout specified when registering the workflow type using RegisterWorkflowType.

The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to specify unlimited duration. <note>A task start-to-close timeout for the new workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task start-to-close timeout was specified at registration time then a fault will be returned.</note>

 
     public void setTaskStartToCloseTimeout(String taskStartToCloseTimeout) {
         this. = taskStartToCloseTimeout;
     }
    
    
Specifies the maximum duration of decision tasks for the new workflow execution. This parameter overrides the defaultTaskStartToCloseTimout specified when registering the workflow type using RegisterWorkflowType.

The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to specify unlimited duration. <note>A task start-to-close timeout for the new workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task start-to-close timeout was specified at registration time then a fault will be returned.</note>

Returns a reference to this object so that method calls can be chained together.

Constraints:
Length: 0 - 8

Parameters:
taskStartToCloseTimeout Specifies the maximum duration of decision tasks for the new workflow execution. This parameter overrides the defaultTaskStartToCloseTimout specified when registering the workflow type using RegisterWorkflowType.

The duration is specified in seconds; an integer greater than or equal to 0. The value "NONE" can be used to specify unlimited duration. <note>A task start-to-close timeout for the new workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default task start-to-close timeout was specified at registration time then a fault will be returned.</note>

Returns:
A reference to this updated object so that method calls can be chained together.
 
         this. = taskStartToCloseTimeout;
         return this;
     }

    
If set, specifies the policy to use for the child workflow executions of the new execution if it is terminated by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using RegisterWorkflowType.

The supported child policies are:

  • TERMINATE: the child executions will be terminated.
  • REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.
  • ABANDON: no action will be taken. The child executions will continue to run.
<note>A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault will be returned.</note>

Constraints:
Allowed Values: TERMINATE, REQUEST_CANCEL, ABANDON

Returns:
If set, specifies the policy to use for the child workflow executions of the new execution if it is terminated by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using RegisterWorkflowType.

The supported child policies are:

  • TERMINATE: the child executions will be terminated.
  • REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.
  • ABANDON: no action will be taken. The child executions will continue to run.
<note>A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault will be returned.</note>
See also:
ChildPolicy
 
     public String getChildPolicy() {
         return ;
     }
    
    
If set, specifies the policy to use for the child workflow executions of the new execution if it is terminated by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using RegisterWorkflowType.

The supported child policies are:

  • TERMINATE: the child executions will be terminated.
  • REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.
  • ABANDON: no action will be taken. The child executions will continue to run.
<note>A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault will be returned.</note>

Constraints:
Allowed Values: TERMINATE, REQUEST_CANCEL, ABANDON

Parameters:
childPolicy If set, specifies the policy to use for the child workflow executions of the new execution if it is terminated by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using RegisterWorkflowType.

The supported child policies are:

  • TERMINATE: the child executions will be terminated.
  • REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.
  • ABANDON: no action will be taken. The child executions will continue to run.
<note>A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault will be returned.</note>
See also:
ChildPolicy
 
     public void setChildPolicy(String childPolicy) {
         this. = childPolicy;
     }
    
    
If set, specifies the policy to use for the child workflow executions of the new execution if it is terminated by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using RegisterWorkflowType.

The supported child policies are:

  • TERMINATE: the child executions will be terminated.
  • REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.
  • ABANDON: no action will be taken. The child executions will continue to run.
<note>A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault will be returned.</note>

Returns a reference to this object so that method calls can be chained together.

Constraints:
Allowed Values: TERMINATE, REQUEST_CANCEL, ABANDON

Parameters:
childPolicy If set, specifies the policy to use for the child workflow executions of the new execution if it is terminated by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using RegisterWorkflowType.

The supported child policies are:

  • TERMINATE: the child executions will be terminated.
  • REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.
  • ABANDON: no action will be taken. The child executions will continue to run.
<note>A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault will be returned.</note>
Returns:
A reference to this updated object so that method calls can be chained together.
See also:
ChildPolicy
 
         this. = childPolicy;
         return this;
     }

    
If set, specifies the policy to use for the child workflow executions of the new execution if it is terminated by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using RegisterWorkflowType.

The supported child policies are:

  • TERMINATE: the child executions will be terminated.
  • REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.
  • ABANDON: no action will be taken. The child executions will continue to run.
<note>A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault will be returned.</note>

Constraints:
Allowed Values: TERMINATE, REQUEST_CANCEL, ABANDON

Parameters:
childPolicy If set, specifies the policy to use for the child workflow executions of the new execution if it is terminated by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using RegisterWorkflowType.

The supported child policies are:

  • TERMINATE: the child executions will be terminated.
  • REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.
  • ABANDON: no action will be taken. The child executions will continue to run.
<note>A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault will be returned.</note>
See also:
ChildPolicy
 
     public void setChildPolicy(ChildPolicy childPolicy) {
         this. = childPolicy.toString();
     }
    
    
If set, specifies the policy to use for the child workflow executions of the new execution if it is terminated by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using RegisterWorkflowType.

The supported child policies are:

  • TERMINATE: the child executions will be terminated.
  • REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.
  • ABANDON: no action will be taken. The child executions will continue to run.
<note>A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault will be returned.</note>

Returns a reference to this object so that method calls can be chained together.

Constraints:
Allowed Values: TERMINATE, REQUEST_CANCEL, ABANDON

Parameters:
childPolicy If set, specifies the policy to use for the child workflow executions of the new execution if it is terminated by calling the TerminateWorkflowExecution action explicitly or due to an expired timeout. This policy overrides the default child policy specified when registering the workflow type using RegisterWorkflowType.

The supported child policies are:

  • TERMINATE: the child executions will be terminated.
  • REQUEST_CANCEL: a request to cancel will be attempted for each child execution by recording a WorkflowExecutionCancelRequested event in its history. It is up to the decider to take appropriate actions when it receives an execution history with this event.
  • ABANDON: no action will be taken. The child executions will continue to run.
<note>A child policy for this workflow execution must be specified either as a default for the workflow type or through this parameter. If neither this parameter is set nor a default child policy was specified at registration time then a fault will be returned.</note>
Returns:
A reference to this updated object so that method calls can be chained together.
See also:
ChildPolicy
 
         this. = childPolicy.toString();
         return this;
     }

    
The list of tags to associate with the new workflow execution. A maximum of 5 tags can be specified. You can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or ListClosedWorkflowExecutions and specifying a TagFilter.

Constraints:
Length: 0 - 5

Returns:
The list of tags to associate with the new workflow execution. A maximum of 5 tags can be specified. You can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or ListClosedWorkflowExecutions and specifying a TagFilter.
 
     public java.util.List<StringgetTagList() {
         return ;
     }
    
    
The list of tags to associate with the new workflow execution. A maximum of 5 tags can be specified. You can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or ListClosedWorkflowExecutions and specifying a TagFilter.

Constraints:
Length: 0 - 5

Parameters:
tagList The list of tags to associate with the new workflow execution. A maximum of 5 tags can be specified. You can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or ListClosedWorkflowExecutions and specifying a TagFilter.
 
     public void setTagList(java.util.Collection<StringtagList) {
         if (tagList == null) {
             this. = null;
             return;
         }
         tagListCopy.addAll(tagList);
         this. = tagListCopy;
     }
    
    
The list of tags to associate with the new workflow execution. A maximum of 5 tags can be specified. You can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or ListClosedWorkflowExecutions and specifying a TagFilter.

NOTE: This method appends the values to the existing list (if any). Use setTagList(java.util.Collection) or withTagList(java.util.Collection) if you want to override the existing values.

Returns a reference to this object so that method calls can be chained together.

Constraints:
Length: 0 - 5

Parameters:
tagList The list of tags to associate with the new workflow execution. A maximum of 5 tags can be specified. You can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or ListClosedWorkflowExecutions and specifying a TagFilter.
Returns:
A reference to this updated object so that method calls can be chained together.
 
         if (getTagList() == nullsetTagList(new java.util.ArrayList<String>(tagList.length));
         for (String value : tagList) {
             getTagList().add(value);
         }
         return this;
     }
    
    
The list of tags to associate with the new workflow execution. A maximum of 5 tags can be specified. You can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or ListClosedWorkflowExecutions and specifying a TagFilter.

Returns a reference to this object so that method calls can be chained together.

Constraints:
Length: 0 - 5

Parameters:
tagList The list of tags to associate with the new workflow execution. A maximum of 5 tags can be specified. You can list workflow executions with a specific tag by calling ListOpenWorkflowExecutions or ListClosedWorkflowExecutions and specifying a TagFilter.
Returns:
A reference to this updated object so that method calls can be chained together.
 
         if (tagList == null) {
             this. = null;
         } else {
             tagListCopy.addAll(tagList);
             this. = tagListCopy;
         }
 
         return this;
     }

    
Returns the value of the WorkflowTypeVersion property for this object.

Constraints:
Length: 1 - 64

Returns:
The value of the WorkflowTypeVersion property for this object.
 
     public String getWorkflowTypeVersion() {
         return ;
     }
    
    
Sets the value of the WorkflowTypeVersion property for this object.

Constraints:
Length: 1 - 64

Parameters:
workflowTypeVersion The new value for the WorkflowTypeVersion property for this object.
 
     public void setWorkflowTypeVersion(String workflowTypeVersion) {
         this. = workflowTypeVersion;
     }
    
    
Sets the value of the WorkflowTypeVersion property for this object.

Returns a reference to this object so that method calls can be chained together.

Constraints:
Length: 1 - 64

Parameters:
workflowTypeVersion The new value for the WorkflowTypeVersion property for this object.
Returns:
A reference to this updated object so that method calls can be chained together.
 
         this. = workflowTypeVersion;
         return this;
     }

    
Returns a string representation of this object; useful for testing and debugging.

Returns:
A string representation of this object.
See also:
java.lang.Object.toString()
 
     @Override
     public String toString() {
         StringBuilder sb = new StringBuilder();
         sb.append("{");
         if (getInput() != nullsb.append("Input: " + getInput() + ",");
         if (getExecutionStartToCloseTimeout() != nullsb.append("ExecutionStartToCloseTimeout: " + getExecutionStartToCloseTimeout() + ",");
         if (getTaskList() != nullsb.append("TaskList: " + getTaskList() + ",");
         if (getTaskPriority() != nullsb.append("TaskPriority: " + getTaskPriority() + ",");
         if (getTaskStartToCloseTimeout() != nullsb.append("TaskStartToCloseTimeout: " + getTaskStartToCloseTimeout() + ",");
         if (getChildPolicy() != nullsb.append("ChildPolicy: " + getChildPolicy() + ",");
         if (getTagList() != nullsb.append("TagList: " + getTagList() + ",");
         if (getWorkflowTypeVersion() != nullsb.append("WorkflowTypeVersion: " + getWorkflowTypeVersion() );
         sb.append("}");
         return sb.toString();
     }
     
     @Override
     public int hashCode() {
         final int prime = 31;
         int hashCode = 1;
         
         hashCode = prime * hashCode + ((getInput() == null) ? 0 : getInput().hashCode()); 
         hashCode = prime * hashCode + ((getExecutionStartToCloseTimeout() == null) ? 0 : getExecutionStartToCloseTimeout().hashCode()); 
         hashCode = prime * hashCode + ((getTaskList() == null) ? 0 : getTaskList().hashCode()); 
         hashCode = prime * hashCode + ((getTaskPriority() == null) ? 0 : getTaskPriority().hashCode()); 
         hashCode = prime * hashCode + ((getTaskStartToCloseTimeout() == null) ? 0 : getTaskStartToCloseTimeout().hashCode()); 
         hashCode = prime * hashCode + ((getChildPolicy() == null) ? 0 : getChildPolicy().hashCode()); 
         hashCode = prime * hashCode + ((getTagList() == null) ? 0 : getTagList().hashCode()); 
         hashCode = prime * hashCode + ((getWorkflowTypeVersion() == null) ? 0 : getWorkflowTypeVersion().hashCode()); 
         return hashCode;
     }
     
     @Override
     public boolean equals(Object obj) {
         if (this == objreturn true;
         if (obj == nullreturn false;
 
         if (obj instanceof ContinueAsNewWorkflowExecutionDecisionAttributes == falsereturn false;
         
         if (other.getInput() == null ^ this.getInput() == nullreturn false;
         if (other.getInput() != null && other.getInput().equals(this.getInput()) == falsereturn false
         if (other.getExecutionStartToCloseTimeout() == null ^ this.getExecutionStartToCloseTimeout() == nullreturn false;
         if (other.getExecutionStartToCloseTimeout() != null && other.getExecutionStartToCloseTimeout().equals(this.getExecutionStartToCloseTimeout()) == falsereturn false
         if (other.getTaskList() == null ^ this.getTaskList() == nullreturn false;
         if (other.getTaskList() != null && other.getTaskList().equals(this.getTaskList()) == falsereturn false
         if (other.getTaskPriority() == null ^ this.getTaskPriority() == nullreturn false;
         if (other.getTaskPriority() != null && other.getTaskPriority().equals(this.getTaskPriority()) == falsereturn false
         if (other.getTaskStartToCloseTimeout() == null ^ this.getTaskStartToCloseTimeout() == nullreturn false;
         if (other.getTaskStartToCloseTimeout() != null && other.getTaskStartToCloseTimeout().equals(this.getTaskStartToCloseTimeout()) == falsereturn false
         if (other.getChildPolicy() == null ^ this.getChildPolicy() == nullreturn false;
         if (other.getChildPolicy() != null && other.getChildPolicy().equals(this.getChildPolicy()) == falsereturn false
         if (other.getTagList() == null ^ this.getTagList() == nullreturn false;
         if (other.getTagList() != null && other.getTagList().equals(this.getTagList()) == falsereturn false
         if (other.getWorkflowTypeVersion() == null ^ this.getWorkflowTypeVersion() == nullreturn false;
         if (other.getWorkflowTypeVersion() != null && other.getWorkflowTypeVersion().equals(this.getWorkflowTypeVersion()) == falsereturn false
         return true;
     }
     
     @Override
        try {
            return (ContinueAsNewWorkflowExecutionDecisionAttributessuper.clone();
        
        } catch (CloneNotSupportedException e) {
            throw new IllegalStateException(
                    "Got a CloneNotSupportedException from Object.clone() "
                    + "even though we're Cloneable!",
                    e);
        }
        
    }
}
    
New to GrepCode? Check out our FAQ X