Start line:  
End line:  

Snippet Preview

Snippet HTML Code

Stack Overflow Questions
   /*
    * Copyright 2010-2015 Amazon.com, Inc. or its affiliates. All Rights Reserved.
    * 
    * Licensed under the Apache License, Version 2.0 (the "License").
    * You may not use this file except in compliance with the License.
    * A copy of the License is located at
    * 
    *  http://aws.amazon.com/apache2.0
    * 
   * or in the "license" file accompanying this file. This file is distributed
   * on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
   * express or implied. See the License for the specific language governing
   * permissions and limitations under the License.
   */
  package com.amazonaws.services.ec2.model;
  
  
Container for the parameters to the DescribeInstances operation.

Describes one or more of your instances.

If you specify one or more instance IDs, Amazon EC2 returns information for those instances. If you do not specify instance IDs, Amazon EC2 returns information for all relevant instances. If you specify an instance ID that is not valid, an error is returned. If you specify an instance that you do not own, it is not included in the returned results.

Recently terminated instances might appear in the returned results. This interval is usually less than one hour.

  
One or more instance IDs.

Default: Describes all your instances.

  
One or more filters.
  • architecture - The instance architecture (i386 | x86_64).

  • availability-zone - The Availability Zone of the instance.

  • block-device-mapping.attach-time - The attach time for an EBS volume mapped to the instance, for example, 2010-09-15T17:15:20.000Z.

  • block-device-mapping.delete-on-termination - A Boolean that indicates whether the EBS volume is deleted on instance termination.

  • block-device-mapping.device-name - The device name for the EBS volume (for example, /dev/sdh or xvdh).

  • block-device-mapping.status - The status for the EBS volume (attaching | attached | detaching | detached).

  • block-device-mapping.volume-id - The volume ID of the EBS volume.

  • client-token - The idempotency token you provided when you launched the instance.

  • dns-name - The public DNS name of the instance.

  • group-id - The ID of the security group for the instance. EC2-Classic only.

  • group-name - The name of the security group for the instance. EC2-Classic only.

  • hypervisor - The hypervisor type of the instance (ovm | xen).

  • iam-instance-profile.arn - The instance profile associated with the instance. Specified as an ARN.

  • image-id - The ID of the image used to launch the instance.

  • instance-id - The ID of the instance.

  • instance-lifecycle - Indicates whether this is a Spot Instance (spot).

  • instance-state-code - The state of the instance, as a 16-bit unsigned integer. The high byte is an opaque internal value and should be ignored. The low byte is set based on the state represented. The valid values are: 0 (pending), 16 (running), 32 (shutting-down), 48 (terminated), 64 (stopping), and 80 (stopped).

  • instance-state-name - The state of the instance (pending | running | shutting-down | terminated | stopping | stopped).

  • instance-type - The type of instance (for example, t2.micro).

  • instance.group-id - The ID of the security group for the instance.

  • instance.group-name - The name of the security group for the instance.

  • ip-address - The public IP address of the instance.

  • kernel-id - The kernel ID.

  • key-name - The name of the key pair used when the instance was launched.

  • launch-index - When launching multiple instances, this is the index for the instance in the launch group (for example, 0, 1, 2, and so on).

  • launch-time - The time when the instance was launched.

  • monitoring-state - Indicates whether monitoring is enabled for the instance (disabled | enabled).

  • owner-id - The AWS account ID of the instance owner.

  • placement-group-name - The name of the placement group for the instance.

  • platform - The platform. Use windows if you have Windows instances; otherwise, leave blank.

  • private-dns-name - The private DNS name of the instance.

  • private-ip-address - The private IP address of the instance.

  • product-code - The product code associated with the AMI used to launch the instance.

  • product-code.type - The type of product code (devpay | marketplace).

  • ramdisk-id - The RAM disk ID.

  • reason - The reason for the current state of the instance (for example, shows "User Initiated [date]" when you stop or terminate the instance). Similar to the state-reason-code filter.

  • requester-id - The ID of the entity that launched the instance on your behalf (for example, AWS Management Console, Auto Scaling, and so on).

  • reservation-id - The ID of the instance's reservation. A reservation ID is created any time you launch an instance. A reservation ID has a one-to-one relationship with an instance launch request, but can be associated with more than one instance if you launch multiple instances using the same launch request. For example, if you launch one instance, you'll get one reservation ID. If you launch ten instances using the same launch request, you'll also get one reservation ID.

  • root-device-name - The name of the root device for the instance (for example, /dev/sda1 or /dev/xvda).

  • root-device-type - The type of root device that the instance uses (ebs | instance-store).

  • source-dest-check - Indicates whether the instance performs source/destination checking. A value of true means that checking is enabled, and false means checking is disabled. The value must be false for the instance to perform network address translation (NAT) in your VPC.

  • spot-instance-request-id - The ID of the Spot Instance request.

  • state-reason-code - The reason code for the state change.

  • state-reason-message - A message that describes the state change.

  • subnet-id - The ID of the subnet for the instance.

  • tag:key=value - The key/value combination of a tag assigned to the resource, where tag:key is the tag's key.

  • tag-key - The key of a tag assigned to the resource. This filter is independent of the tag-value filter. For example, if you use both the filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources assigned both the tag key Purpose (regardless of what the tag's value is), and the tag value X (regardless of what the tag's key is). If you want to list only resources where Purpose is X, see the tag:key=value filter.

  • tag-value - The value of a tag assigned to the resource. This filter is independent of the tag-key filter.

  • tenancy - The tenancy of an instance (dedicated | default).

  • virtualization-type - The virtualization type of the instance (paravirtual | hvm).

  • vpc-id - The ID of the VPC that the instance is running in.

  • network-interface.description - The description of the network interface.

  • network-interface.subnet-id - The ID of the subnet for the network interface.

  • network-interface.vpc-id - The ID of the VPC for the network interface.

  • network-interface.network-interface.id - The ID of the network interface.

  • network-interface.owner-id - The ID of the owner of the network interface.

  • network-interface.availability-zone - The Availability Zone for the network interface.

  • network-interface.requester-id - The requester ID for the network interface.

  • network-interface.requester-managed - Indicates whether the network interface is being managed by AWS.

  • network-interface.status - The status of the network interface (available) | in-use).

  • network-interface.mac-address - The MAC address of the network interface.

  • network-interface-private-dns-name - The private DNS name of the network interface.

  • network-interface.source-dest-check - Whether the network interface performs source/destination checking. A value of true means checking is enabled, and false means checking is disabled. The value must be false for the network interface to perform network address translation (NAT) in your VPC.

  • network-interface.group-id - The ID of a security group associated with the network interface.

  • network-interface.group-name - The name of a security group associated with the network interface.

  • network-interface.attachment.attachment-id - The ID of the interface attachment.

  • network-interface.attachment.instance-id - The ID of the instance to which the network interface is attached.

  • network-interface.attachment.instance-owner-id - The owner ID of the instance to which the network interface is attached.

  • network-interface.addresses.private-ip-address - The private IP address associated with the network interface.

  • network-interface.attachment.device-index - The device index to which the network interface is attached.

  • network-interface.attachment.status - The status of the attachment (attaching | attached | detaching | detached).

  • network-interface.attachment.attach-time - The time that the network interface was attached to an instance.

  • network-interface.attachment.delete-on-termination - Specifies whether the attachment is deleted when an instance is terminated.

  • network-interface.addresses.primary - Specifies whether the IP address of the network interface is the primary private IP address.

  • network-interface.addresses.association.public-ip - The ID of the association of an Elastic IP address with a network interface.

  • network-interface.addresses.association.ip-owner-id - The owner ID of the private IP address associated with the network interface.

  • association.public-ip - The address of the Elastic IP address bound to the network interface.

  • association.ip-owner-id - The owner of the Elastic IP address associated with the network interface.

  • association.allocation-id - The allocation ID returned when you allocated the Elastic IP address for your network interface.

  • association.association-id - The association ID returned when the network interface was associated with an IP address.

 
The token to request the next page of results.
 
     private String nextToken;

    
The maximum number of results to return for the request in a single page. The remaining results of the initial request can be seen by sending another request with the returned NextToken value. This value can be between 5 and 1000; if MaxResults is given a value larger than 1000, only 1000 results are returned. You cannot specify this parameter and the instance IDs parameter in the same request.
 
     private Integer maxResults;

    
One or more instance IDs.

Default: Describes all your instances.

Returns:
One or more instance IDs.

Default: Describes all your instances.

 
     public java.util.List<StringgetInstanceIds() {
         if ( == null) {
                = new com.amazonaws.internal.ListWithAutoConstructFlag<String>();
               .setAutoConstruct(true);
         }
         return ;
     }
    
    
One or more instance IDs.

Default: Describes all your instances.

Parameters:
instanceIds One or more instance IDs.

Default: Describes all your instances.

 
     public void setInstanceIds(java.util.Collection<StringinstanceIds) {
         if (instanceIds == null) {
             this. = null;
             return;
         }
         instanceIdsCopy.addAll(instanceIds);
         this. = instanceIdsCopy;
     }
    
    
One or more instance IDs.

Default: Describes all your instances.

NOTE: This method appends the values to the existing list (if any). Use setInstanceIds(java.util.Collection) or withInstanceIds(java.util.Collection) if you want to override the existing values.

Returns a reference to this object so that method calls can be chained together.

Parameters:
instanceIds One or more instance IDs.

Default: Describes all your instances.

Returns:
A reference to this updated object so that method calls can be chained together.
 
     public DescribeInstancesRequest withInstanceIds(String... instanceIds) {
         if (getInstanceIds() == nullsetInstanceIds(new java.util.ArrayList<String>(instanceIds.length));
         for (String value : instanceIds) {
             getInstanceIds().add(value);
         }
         return this;
     }
    
    
One or more instance IDs.

Default: Describes all your instances.

Returns a reference to this object so that method calls can be chained together.

Parameters:
instanceIds One or more instance IDs.

Default: Describes all your instances.

Returns:
A reference to this updated object so that method calls can be chained together.
 
         if (instanceIds == null) {
             this. = null;
         } else {
             com.amazonaws.internal.ListWithAutoConstructFlag<StringinstanceIdsCopy = new com.amazonaws.internal.ListWithAutoConstructFlag<String>(instanceIds.size());
             instanceIdsCopy.addAll(instanceIds);
             this. = instanceIdsCopy;
         }
 
         return this;
     }

    
One or more filters.
  • architecture - The instance architecture (i386 | x86_64).

  • availability-zone - The Availability Zone of the instance.

  • block-device-mapping.attach-time - The attach time for an EBS volume mapped to the instance, for example, 2010-09-15T17:15:20.000Z.

  • block-device-mapping.delete-on-termination - A Boolean that indicates whether the EBS volume is deleted on instance termination.

  • block-device-mapping.device-name - The device name for the EBS volume (for example, /dev/sdh or xvdh).

  • block-device-mapping.status - The status for the EBS volume (attaching | attached | detaching | detached).

  • block-device-mapping.volume-id - The volume ID of the EBS volume.

  • client-token - The idempotency token you provided when you launched the instance.

  • dns-name - The public DNS name of the instance.

  • group-id - The ID of the security group for the instance. EC2-Classic only.

  • group-name - The name of the security group for the instance. EC2-Classic only.

  • hypervisor - The hypervisor type of the instance (ovm | xen).

  • iam-instance-profile.arn - The instance profile associated with the instance. Specified as an ARN.

  • image-id - The ID of the image used to launch the instance.

  • instance-id - The ID of the instance.

  • instance-lifecycle - Indicates whether this is a Spot Instance (spot).

  • instance-state-code - The state of the instance, as a 16-bit unsigned integer. The high byte is an opaque internal value and should be ignored. The low byte is set based on the state represented. The valid values are: 0 (pending), 16 (running), 32 (shutting-down), 48 (terminated), 64 (stopping), and 80 (stopped).

  • instance-state-name - The state of the instance (pending | running | shutting-down | terminated | stopping | stopped).

  • instance-type - The type of instance (for example, t2.micro).

  • instance.group-id - The ID of the security group for the instance.

  • instance.group-name - The name of the security group for the instance.

  • ip-address - The public IP address of the instance.

  • kernel-id - The kernel ID.

  • key-name - The name of the key pair used when the instance was launched.

  • launch-index - When launching multiple instances, this is the index for the instance in the launch group (for example, 0, 1, 2, and so on).

  • launch-time - The time when the instance was launched.

  • monitoring-state - Indicates whether monitoring is enabled for the instance (disabled | enabled).

  • owner-id - The AWS account ID of the instance owner.

  • placement-group-name - The name of the placement group for the instance.

  • platform - The platform. Use windows if you have Windows instances; otherwise, leave blank.

  • private-dns-name - The private DNS name of the instance.

  • private-ip-address - The private IP address of the instance.

  • product-code - The product code associated with the AMI used to launch the instance.

  • product-code.type - The type of product code (devpay | marketplace).

  • ramdisk-id - The RAM disk ID.

  • reason - The reason for the current state of the instance (for example, shows "User Initiated [date]" when you stop or terminate the instance). Similar to the state-reason-code filter.

  • requester-id - The ID of the entity that launched the instance on your behalf (for example, AWS Management Console, Auto Scaling, and so on).

  • reservation-id - The ID of the instance's reservation. A reservation ID is created any time you launch an instance. A reservation ID has a one-to-one relationship with an instance launch request, but can be associated with more than one instance if you launch multiple instances using the same launch request. For example, if you launch one instance, you'll get one reservation ID. If you launch ten instances using the same launch request, you'll also get one reservation ID.

  • root-device-name - The name of the root device for the instance (for example, /dev/sda1 or /dev/xvda).

  • root-device-type - The type of root device that the instance uses (ebs | instance-store).

  • source-dest-check - Indicates whether the instance performs source/destination checking. A value of true means that checking is enabled, and false means checking is disabled. The value must be false for the instance to perform network address translation (NAT) in your VPC.

  • spot-instance-request-id - The ID of the Spot Instance request.

  • state-reason-code - The reason code for the state change.

  • state-reason-message - A message that describes the state change.

  • subnet-id - The ID of the subnet for the instance.

  • tag:key=value - The key/value combination of a tag assigned to the resource, where tag:key is the tag's key.

  • tag-key - The key of a tag assigned to the resource. This filter is independent of the tag-value filter. For example, if you use both the filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources assigned both the tag key Purpose (regardless of what the tag's value is), and the tag value X (regardless of what the tag's key is). If you want to list only resources where Purpose is X, see the tag:key=value filter.

  • tag-value - The value of a tag assigned to the resource. This filter is independent of the tag-key filter.

  • tenancy - The tenancy of an instance (dedicated | default).

  • virtualization-type - The virtualization type of the instance (paravirtual | hvm).

  • vpc-id - The ID of the VPC that the instance is running in.

  • network-interface.description - The description of the network interface.

  • network-interface.subnet-id - The ID of the subnet for the network interface.

  • network-interface.vpc-id - The ID of the VPC for the network interface.

  • network-interface.network-interface.id - The ID of the network interface.

  • network-interface.owner-id - The ID of the owner of the network interface.

  • network-interface.availability-zone - The Availability Zone for the network interface.

  • network-interface.requester-id - The requester ID for the network interface.

  • network-interface.requester-managed - Indicates whether the network interface is being managed by AWS.

  • network-interface.status - The status of the network interface (available) | in-use).

  • network-interface.mac-address - The MAC address of the network interface.

  • network-interface-private-dns-name - The private DNS name of the network interface.

  • network-interface.source-dest-check - Whether the network interface performs source/destination checking. A value of true means checking is enabled, and false means checking is disabled. The value must be false for the network interface to perform network address translation (NAT) in your VPC.

  • network-interface.group-id - The ID of a security group associated with the network interface.

  • network-interface.group-name - The name of a security group associated with the network interface.

  • network-interface.attachment.attachment-id - The ID of the interface attachment.

  • network-interface.attachment.instance-id - The ID of the instance to which the network interface is attached.

  • network-interface.attachment.instance-owner-id - The owner ID of the instance to which the network interface is attached.

  • network-interface.addresses.private-ip-address - The private IP address associated with the network interface.

  • network-interface.attachment.device-index - The device index to which the network interface is attached.

  • network-interface.attachment.status - The status of the attachment (attaching | attached | detaching | detached).

  • network-interface.attachment.attach-time - The time that the network interface was attached to an instance.

  • network-interface.attachment.delete-on-termination - Specifies whether the attachment is deleted when an instance is terminated.

  • network-interface.addresses.primary - Specifies whether the IP address of the network interface is the primary private IP address.

  • network-interface.addresses.association.public-ip - The ID of the association of an Elastic IP address with a network interface.

  • network-interface.addresses.association.ip-owner-id - The owner ID of the private IP address associated with the network interface.

  • association.public-ip - The address of the Elastic IP address bound to the network interface.

  • association.ip-owner-id - The owner of the Elastic IP address associated with the network interface.

  • association.allocation-id - The allocation ID returned when you allocated the Elastic IP address for your network interface.

  • association.association-id - The association ID returned when the network interface was associated with an IP address.

Returns:
One or more filters.
  • architecture - The instance architecture (i386 | x86_64).

  • availability-zone - The Availability Zone of the instance.

  • block-device-mapping.attach-time - The attach time for an EBS volume mapped to the instance, for example, 2010-09-15T17:15:20.000Z.

  • block-device-mapping.delete-on-termination - A Boolean that indicates whether the EBS volume is deleted on instance termination.

  • block-device-mapping.device-name - The device name for the EBS volume (for example, /dev/sdh or xvdh).

  • block-device-mapping.status - The status for the EBS volume (attaching | attached | detaching | detached).

  • block-device-mapping.volume-id - The volume ID of the EBS volume.

  • client-token - The idempotency token you provided when you launched the instance.

  • dns-name - The public DNS name of the instance.

  • group-id - The ID of the security group for the instance. EC2-Classic only.

  • group-name - The name of the security group for the instance. EC2-Classic only.

  • hypervisor - The hypervisor type of the instance (ovm | xen).

  • iam-instance-profile.arn - The instance profile associated with the instance. Specified as an ARN.

  • image-id - The ID of the image used to launch the instance.

  • instance-id - The ID of the instance.

  • instance-lifecycle - Indicates whether this is a Spot Instance (spot).

  • instance-state-code - The state of the instance, as a 16-bit unsigned integer. The high byte is an opaque internal value and should be ignored. The low byte is set based on the state represented. The valid values are: 0 (pending), 16 (running), 32 (shutting-down), 48 (terminated), 64 (stopping), and 80 (stopped).

  • instance-state-name - The state of the instance (pending | running | shutting-down | terminated | stopping | stopped).

  • instance-type - The type of instance (for example, t2.micro).

  • instance.group-id - The ID of the security group for the instance.

  • instance.group-name - The name of the security group for the instance.

  • ip-address - The public IP address of the instance.

  • kernel-id - The kernel ID.

  • key-name - The name of the key pair used when the instance was launched.

  • launch-index - When launching multiple instances, this is the index for the instance in the launch group (for example, 0, 1, 2, and so on).

  • launch-time - The time when the instance was launched.

  • monitoring-state - Indicates whether monitoring is enabled for the instance (disabled | enabled).

  • owner-id - The AWS account ID of the instance owner.

  • placement-group-name - The name of the placement group for the instance.

  • platform - The platform. Use windows if you have Windows instances; otherwise, leave blank.

  • private-dns-name - The private DNS name of the instance.

  • private-ip-address - The private IP address of the instance.

  • product-code - The product code associated with the AMI used to launch the instance.

  • product-code.type - The type of product code (devpay | marketplace).

  • ramdisk-id - The RAM disk ID.

  • reason - The reason for the current state of the instance (for example, shows "User Initiated [date]" when you stop or terminate the instance). Similar to the state-reason-code filter.

  • requester-id - The ID of the entity that launched the instance on your behalf (for example, AWS Management Console, Auto Scaling, and so on).

  • reservation-id - The ID of the instance's reservation. A reservation ID is created any time you launch an instance. A reservation ID has a one-to-one relationship with an instance launch request, but can be associated with more than one instance if you launch multiple instances using the same launch request. For example, if you launch one instance, you'll get one reservation ID. If you launch ten instances using the same launch request, you'll also get one reservation ID.

  • root-device-name - The name of the root device for the instance (for example, /dev/sda1 or /dev/xvda).

  • root-device-type - The type of root device that the instance uses (ebs | instance-store).

  • source-dest-check - Indicates whether the instance performs source/destination checking. A value of true means that checking is enabled, and false means checking is disabled. The value must be false for the instance to perform network address translation (NAT) in your VPC.

  • spot-instance-request-id - The ID of the Spot Instance request.

  • state-reason-code - The reason code for the state change.

  • state-reason-message - A message that describes the state change.

  • subnet-id - The ID of the subnet for the instance.

  • tag:key=value - The key/value combination of a tag assigned to the resource, where tag:key is the tag's key.

  • tag-key - The key of a tag assigned to the resource. This filter is independent of the tag-value filter. For example, if you use both the filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources assigned both the tag key Purpose (regardless of what the tag's value is), and the tag value X (regardless of what the tag's key is). If you want to list only resources where Purpose is X, see the tag:key=value filter.

  • tag-value - The value of a tag assigned to the resource. This filter is independent of the tag-key filter.

  • tenancy - The tenancy of an instance (dedicated | default).

  • virtualization-type - The virtualization type of the instance (paravirtual | hvm).

  • vpc-id - The ID of the VPC that the instance is running in.

  • network-interface.description - The description of the network interface.

  • network-interface.subnet-id - The ID of the subnet for the network interface.

  • network-interface.vpc-id - The ID of the VPC for the network interface.

  • network-interface.network-interface.id - The ID of the network interface.

  • network-interface.owner-id - The ID of the owner of the network interface.

  • network-interface.availability-zone - The Availability Zone for the network interface.

  • network-interface.requester-id - The requester ID for the network interface.

  • network-interface.requester-managed - Indicates whether the network interface is being managed by AWS.

  • network-interface.status - The status of the network interface (available) | in-use).

  • network-interface.mac-address - The MAC address of the network interface.

  • network-interface-private-dns-name - The private DNS name of the network interface.

  • network-interface.source-dest-check - Whether the network interface performs source/destination checking. A value of true means checking is enabled, and false means checking is disabled. The value must be false for the network interface to perform network address translation (NAT) in your VPC.

  • network-interface.group-id - The ID of a security group associated with the network interface.

  • network-interface.group-name - The name of a security group associated with the network interface.

  • network-interface.attachment.attachment-id - The ID of the interface attachment.

  • network-interface.attachment.instance-id - The ID of the instance to which the network interface is attached.

  • network-interface.attachment.instance-owner-id - The owner ID of the instance to which the network interface is attached.

  • network-interface.addresses.private-ip-address - The private IP address associated with the network interface.

  • network-interface.attachment.device-index - The device index to which the network interface is attached.

  • network-interface.attachment.status - The status of the attachment (attaching | attached | detaching | detached).

  • network-interface.attachment.attach-time - The time that the network interface was attached to an instance.

  • network-interface.attachment.delete-on-termination - Specifies whether the attachment is deleted when an instance is terminated.

  • network-interface.addresses.primary - Specifies whether the IP address of the network interface is the primary private IP address.

  • network-interface.addresses.association.public-ip - The ID of the association of an Elastic IP address with a network interface.

  • network-interface.addresses.association.ip-owner-id - The owner ID of the private IP address associated with the network interface.

  • association.public-ip - The address of the Elastic IP address bound to the network interface.

  • association.ip-owner-id - The owner of the Elastic IP address associated with the network interface.

  • association.allocation-id - The allocation ID returned when you allocated the Elastic IP address for your network interface.

  • association.association-id - The association ID returned when the network interface was associated with an IP address.

 
     public java.util.List<FiltergetFilters() {
         if ( == null) {
                = new com.amazonaws.internal.ListWithAutoConstructFlag<Filter>();
               .setAutoConstruct(true);
         }
         return ;
     }
    
    
One or more filters.
  • architecture - The instance architecture (i386 | x86_64).

  • availability-zone - The Availability Zone of the instance.

  • block-device-mapping.attach-time - The attach time for an EBS volume mapped to the instance, for example, 2010-09-15T17:15:20.000Z.

  • block-device-mapping.delete-on-termination - A Boolean that indicates whether the EBS volume is deleted on instance termination.

  • block-device-mapping.device-name - The device name for the EBS volume (for example, /dev/sdh or xvdh).

  • block-device-mapping.status - The status for the EBS volume (attaching | attached | detaching | detached).

  • block-device-mapping.volume-id - The volume ID of the EBS volume.

  • client-token - The idempotency token you provided when you launched the instance.

  • dns-name - The public DNS name of the instance.

  • group-id - The ID of the security group for the instance. EC2-Classic only.

  • group-name - The name of the security group for the instance. EC2-Classic only.

  • hypervisor - The hypervisor type of the instance (ovm | xen).

  • iam-instance-profile.arn - The instance profile associated with the instance. Specified as an ARN.

  • image-id - The ID of the image used to launch the instance.

  • instance-id - The ID of the instance.

  • instance-lifecycle - Indicates whether this is a Spot Instance (spot).

  • instance-state-code - The state of the instance, as a 16-bit unsigned integer. The high byte is an opaque internal value and should be ignored. The low byte is set based on the state represented. The valid values are: 0 (pending), 16 (running), 32 (shutting-down), 48 (terminated), 64 (stopping), and 80 (stopped).

  • instance-state-name - The state of the instance (pending | running | shutting-down | terminated | stopping | stopped).

  • instance-type - The type of instance (for example, t2.micro).

  • instance.group-id - The ID of the security group for the instance.

  • instance.group-name - The name of the security group for the instance.

  • ip-address - The public IP address of the instance.

  • kernel-id - The kernel ID.

  • key-name - The name of the key pair used when the instance was launched.

  • launch-index - When launching multiple instances, this is the index for the instance in the launch group (for example, 0, 1, 2, and so on).

  • launch-time - The time when the instance was launched.

  • monitoring-state - Indicates whether monitoring is enabled for the instance (disabled | enabled).

  • owner-id - The AWS account ID of the instance owner.

  • placement-group-name - The name of the placement group for the instance.

  • platform - The platform. Use windows if you have Windows instances; otherwise, leave blank.

  • private-dns-name - The private DNS name of the instance.

  • private-ip-address - The private IP address of the instance.

  • product-code - The product code associated with the AMI used to launch the instance.

  • product-code.type - The type of product code (devpay | marketplace).

  • ramdisk-id - The RAM disk ID.

  • reason - The reason for the current state of the instance (for example, shows "User Initiated [date]" when you stop or terminate the instance). Similar to the state-reason-code filter.

  • requester-id - The ID of the entity that launched the instance on your behalf (for example, AWS Management Console, Auto Scaling, and so on).

  • reservation-id - The ID of the instance's reservation. A reservation ID is created any time you launch an instance. A reservation ID has a one-to-one relationship with an instance launch request, but can be associated with more than one instance if you launch multiple instances using the same launch request. For example, if you launch one instance, you'll get one reservation ID. If you launch ten instances using the same launch request, you'll also get one reservation ID.

  • root-device-name - The name of the root device for the instance (for example, /dev/sda1 or /dev/xvda).

  • root-device-type - The type of root device that the instance uses (ebs | instance-store).

  • source-dest-check - Indicates whether the instance performs source/destination checking. A value of true means that checking is enabled, and false means checking is disabled. The value must be false for the instance to perform network address translation (NAT) in your VPC.

  • spot-instance-request-id - The ID of the Spot Instance request.

  • state-reason-code - The reason code for the state change.

  • state-reason-message - A message that describes the state change.

  • subnet-id - The ID of the subnet for the instance.

  • tag:key=value - The key/value combination of a tag assigned to the resource, where tag:key is the tag's key.

  • tag-key - The key of a tag assigned to the resource. This filter is independent of the tag-value filter. For example, if you use both the filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources assigned both the tag key Purpose (regardless of what the tag's value is), and the tag value X (regardless of what the tag's key is). If you want to list only resources where Purpose is X, see the tag:key=value filter.

  • tag-value - The value of a tag assigned to the resource. This filter is independent of the tag-key filter.

  • tenancy - The tenancy of an instance (dedicated | default).

  • virtualization-type - The virtualization type of the instance (paravirtual | hvm).

  • vpc-id - The ID of the VPC that the instance is running in.

  • network-interface.description - The description of the network interface.

  • network-interface.subnet-id - The ID of the subnet for the network interface.

  • network-interface.vpc-id - The ID of the VPC for the network interface.

  • network-interface.network-interface.id - The ID of the network interface.

  • network-interface.owner-id - The ID of the owner of the network interface.

  • network-interface.availability-zone - The Availability Zone for the network interface.

  • network-interface.requester-id - The requester ID for the network interface.

  • network-interface.requester-managed - Indicates whether the network interface is being managed by AWS.

  • network-interface.status - The status of the network interface (available) | in-use).

  • network-interface.mac-address - The MAC address of the network interface.

  • network-interface-private-dns-name - The private DNS name of the network interface.

  • network-interface.source-dest-check - Whether the network interface performs source/destination checking. A value of true means checking is enabled, and false means checking is disabled. The value must be false for the network interface to perform network address translation (NAT) in your VPC.

  • network-interface.group-id - The ID of a security group associated with the network interface.

  • network-interface.group-name - The name of a security group associated with the network interface.

  • network-interface.attachment.attachment-id - The ID of the interface attachment.

  • network-interface.attachment.instance-id - The ID of the instance to which the network interface is attached.

  • network-interface.attachment.instance-owner-id - The owner ID of the instance to which the network interface is attached.

  • network-interface.addresses.private-ip-address - The private IP address associated with the network interface.

  • network-interface.attachment.device-index - The device index to which the network interface is attached.

  • network-interface.attachment.status - The status of the attachment (attaching | attached | detaching | detached).

  • network-interface.attachment.attach-time - The time that the network interface was attached to an instance.

  • network-interface.attachment.delete-on-termination - Specifies whether the attachment is deleted when an instance is terminated.

  • network-interface.addresses.primary - Specifies whether the IP address of the network interface is the primary private IP address.

  • network-interface.addresses.association.public-ip - The ID of the association of an Elastic IP address with a network interface.

  • network-interface.addresses.association.ip-owner-id - The owner ID of the private IP address associated with the network interface.

  • association.public-ip - The address of the Elastic IP address bound to the network interface.

  • association.ip-owner-id - The owner of the Elastic IP address associated with the network interface.

  • association.allocation-id - The allocation ID returned when you allocated the Elastic IP address for your network interface.

  • association.association-id - The association ID returned when the network interface was associated with an IP address.

Parameters:
filters One or more filters.
  • architecture - The instance architecture (i386 | x86_64).

  • availability-zone - The Availability Zone of the instance.

  • block-device-mapping.attach-time - The attach time for an EBS volume mapped to the instance, for example, 2010-09-15T17:15:20.000Z.

  • block-device-mapping.delete-on-termination - A Boolean that indicates whether the EBS volume is deleted on instance termination.

  • block-device-mapping.device-name - The device name for the EBS volume (for example, /dev/sdh or xvdh).

  • block-device-mapping.status - The status for the EBS volume (attaching | attached | detaching | detached).

  • block-device-mapping.volume-id - The volume ID of the EBS volume.

  • client-token - The idempotency token you provided when you launched the instance.

  • dns-name - The public DNS name of the instance.

  • group-id - The ID of the security group for the instance. EC2-Classic only.

  • group-name - The name of the security group for the instance. EC2-Classic only.

  • hypervisor - The hypervisor type of the instance (ovm | xen).

  • iam-instance-profile.arn - The instance profile associated with the instance. Specified as an ARN.

  • image-id - The ID of the image used to launch the instance.

  • instance-id - The ID of the instance.

  • instance-lifecycle - Indicates whether this is a Spot Instance (spot).

  • instance-state-code - The state of the instance, as a 16-bit unsigned integer. The high byte is an opaque internal value and should be ignored. The low byte is set based on the state represented. The valid values are: 0 (pending), 16 (running), 32 (shutting-down), 48 (terminated), 64 (stopping), and 80 (stopped).

  • instance-state-name - The state of the instance (pending | running | shutting-down | terminated | stopping | stopped).

  • instance-type - The type of instance (for example, t2.micro).

  • instance.group-id - The ID of the security group for the instance.

  • instance.group-name - The name of the security group for the instance.

  • ip-address - The public IP address of the instance.

  • kernel-id - The kernel ID.

  • key-name - The name of the key pair used when the instance was launched.

  • launch-index - When launching multiple instances, this is the index for the instance in the launch group (for example, 0, 1, 2, and so on).

  • launch-time - The time when the instance was launched.

  • monitoring-state - Indicates whether monitoring is enabled for the instance (disabled | enabled).

  • owner-id - The AWS account ID of the instance owner.

  • placement-group-name - The name of the placement group for the instance.

  • platform - The platform. Use windows if you have Windows instances; otherwise, leave blank.

  • private-dns-name - The private DNS name of the instance.

  • private-ip-address - The private IP address of the instance.

  • product-code - The product code associated with the AMI used to launch the instance.

  • product-code.type - The type of product code (devpay | marketplace).

  • ramdisk-id - The RAM disk ID.

  • reason - The reason for the current state of the instance (for example, shows "User Initiated [date]" when you stop or terminate the instance). Similar to the state-reason-code filter.

  • requester-id - The ID of the entity that launched the instance on your behalf (for example, AWS Management Console, Auto Scaling, and so on).

  • reservation-id - The ID of the instance's reservation. A reservation ID is created any time you launch an instance. A reservation ID has a one-to-one relationship with an instance launch request, but can be associated with more than one instance if you launch multiple instances using the same launch request. For example, if you launch one instance, you'll get one reservation ID. If you launch ten instances using the same launch request, you'll also get one reservation ID.

  • root-device-name - The name of the root device for the instance (for example, /dev/sda1 or /dev/xvda).

  • root-device-type - The type of root device that the instance uses (ebs | instance-store).

  • source-dest-check - Indicates whether the instance performs source/destination checking. A value of true means that checking is enabled, and false means checking is disabled. The value must be false for the instance to perform network address translation (NAT) in your VPC.

  • spot-instance-request-id - The ID of the Spot Instance request.

  • state-reason-code - The reason code for the state change.

  • state-reason-message - A message that describes the state change.

  • subnet-id - The ID of the subnet for the instance.

  • tag:key=value - The key/value combination of a tag assigned to the resource, where tag:key is the tag's key.

  • tag-key - The key of a tag assigned to the resource. This filter is independent of the tag-value filter. For example, if you use both the filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources assigned both the tag key Purpose (regardless of what the tag's value is), and the tag value X (regardless of what the tag's key is). If you want to list only resources where Purpose is X, see the tag:key=value filter.

  • tag-value - The value of a tag assigned to the resource. This filter is independent of the tag-key filter.

  • tenancy - The tenancy of an instance (dedicated | default).

  • virtualization-type - The virtualization type of the instance (paravirtual | hvm).

  • vpc-id - The ID of the VPC that the instance is running in.

  • network-interface.description - The description of the network interface.

  • network-interface.subnet-id - The ID of the subnet for the network interface.

  • network-interface.vpc-id - The ID of the VPC for the network interface.

  • network-interface.network-interface.id - The ID of the network interface.

  • network-interface.owner-id - The ID of the owner of the network interface.

  • network-interface.availability-zone - The Availability Zone for the network interface.

  • network-interface.requester-id - The requester ID for the network interface.

  • network-interface.requester-managed - Indicates whether the network interface is being managed by AWS.

  • network-interface.status - The status of the network interface (available) | in-use).

  • network-interface.mac-address - The MAC address of the network interface.

  • network-interface-private-dns-name - The private DNS name of the network interface.

  • network-interface.source-dest-check - Whether the network interface performs source/destination checking. A value of true means checking is enabled, and false means checking is disabled. The value must be false for the network interface to perform network address translation (NAT) in your VPC.

  • network-interface.group-id - The ID of a security group associated with the network interface.

  • network-interface.group-name - The name of a security group associated with the network interface.

  • network-interface.attachment.attachment-id - The ID of the interface attachment.

  • network-interface.attachment.instance-id - The ID of the instance to which the network interface is attached.

  • network-interface.attachment.instance-owner-id - The owner ID of the instance to which the network interface is attached.

  • network-interface.addresses.private-ip-address - The private IP address associated with the network interface.

  • network-interface.attachment.device-index - The device index to which the network interface is attached.

  • network-interface.attachment.status - The status of the attachment (attaching | attached | detaching | detached).

  • network-interface.attachment.attach-time - The time that the network interface was attached to an instance.

  • network-interface.attachment.delete-on-termination - Specifies whether the attachment is deleted when an instance is terminated.

  • network-interface.addresses.primary - Specifies whether the IP address of the network interface is the primary private IP address.

  • network-interface.addresses.association.public-ip - The ID of the association of an Elastic IP address with a network interface.

  • network-interface.addresses.association.ip-owner-id - The owner ID of the private IP address associated with the network interface.

  • association.public-ip - The address of the Elastic IP address bound to the network interface.

  • association.ip-owner-id - The owner of the Elastic IP address associated with the network interface.

  • association.allocation-id - The allocation ID returned when you allocated the Elastic IP address for your network interface.

  • association.association-id - The association ID returned when the network interface was associated with an IP address.

    public void setFilters(java.util.Collection<Filterfilters) {
        if (filters == null) {
            this. = null;
            return;
        }
        filtersCopy.addAll(filters);
        this. = filtersCopy;
    }
    
    
One or more filters.
  • architecture - The instance architecture (i386 | x86_64).

  • availability-zone - The Availability Zone of the instance.

  • block-device-mapping.attach-time - The attach time for an EBS volume mapped to the instance, for example, 2010-09-15T17:15:20.000Z.

  • block-device-mapping.delete-on-termination - A Boolean that indicates whether the EBS volume is deleted on instance termination.

  • block-device-mapping.device-name - The device name for the EBS volume (for example, /dev/sdh or xvdh).

  • block-device-mapping.status - The status for the EBS volume (attaching | attached | detaching | detached).

  • block-device-mapping.volume-id - The volume ID of the EBS volume.

  • client-token - The idempotency token you provided when you launched the instance.

  • dns-name - The public DNS name of the instance.

  • group-id - The ID of the security group for the instance. EC2-Classic only.

  • group-name - The name of the security group for the instance. EC2-Classic only.

  • hypervisor - The hypervisor type of the instance (ovm | xen).

  • iam-instance-profile.arn - The instance profile associated with the instance. Specified as an ARN.

  • image-id - The ID of the image used to launch the instance.

  • instance-id - The ID of the instance.

  • instance-lifecycle - Indicates whether this is a Spot Instance (spot).

  • instance-state-code - The state of the instance, as a 16-bit unsigned integer. The high byte is an opaque internal value and should be ignored. The low byte is set based on the state represented. The valid values are: 0 (pending), 16 (running), 32 (shutting-down), 48 (terminated), 64 (stopping), and 80 (stopped).

  • instance-state-name - The state of the instance (pending | running | shutting-down | terminated | stopping | stopped).

  • instance-type - The type of instance (for example, t2.micro).

  • instance.group-id - The ID of the security group for the instance.

  • instance.group-name - The name of the security group for the instance.

  • ip-address - The public IP address of the instance.

  • kernel-id - The kernel ID.

  • key-name - The name of the key pair used when the instance was launched.

  • launch-index - When launching multiple instances, this is the index for the instance in the launch group (for example, 0, 1, 2, and so on).

  • launch-time - The time when the instance was launched.

  • monitoring-state - Indicates whether monitoring is enabled for the instance (disabled | enabled).

  • owner-id - The AWS account ID of the instance owner.

  • placement-group-name - The name of the placement group for the instance.

  • platform - The platform. Use windows if you have Windows instances; otherwise, leave blank.

  • private-dns-name - The private DNS name of the instance.

  • private-ip-address - The private IP address of the instance.

  • product-code - The product code associated with the AMI used to launch the instance.

  • product-code.type - The type of product code (devpay | marketplace).

  • ramdisk-id - The RAM disk ID.

  • reason - The reason for the current state of the instance (for example, shows "User Initiated [date]" when you stop or terminate the instance). Similar to the state-reason-code filter.

  • requester-id - The ID of the entity that launched the instance on your behalf (for example, AWS Management Console, Auto Scaling, and so on).

  • reservation-id - The ID of the instance's reservation. A reservation ID is created any time you launch an instance. A reservation ID has a one-to-one relationship with an instance launch request, but can be associated with more than one instance if you launch multiple instances using the same launch request. For example, if you launch one instance, you'll get one reservation ID. If you launch ten instances using the same launch request, you'll also get one reservation ID.

  • root-device-name - The name of the root device for the instance (for example, /dev/sda1 or /dev/xvda).

  • root-device-type - The type of root device that the instance uses (ebs | instance-store).

  • source-dest-check - Indicates whether the instance performs source/destination checking. A value of true means that checking is enabled, and false means checking is disabled. The value must be false for the instance to perform network address translation (NAT) in your VPC.

  • spot-instance-request-id - The ID of the Spot Instance request.

  • state-reason-code - The reason code for the state change.

  • state-reason-message - A message that describes the state change.

  • subnet-id - The ID of the subnet for the instance.

  • tag:key=value - The key/value combination of a tag assigned to the resource, where tag:key is the tag's key.

  • tag-key - The key of a tag assigned to the resource. This filter is independent of the tag-value filter. For example, if you use both the filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources assigned both the tag key Purpose (regardless of what the tag's value is), and the tag value X (regardless of what the tag's key is). If you want to list only resources where Purpose is X, see the tag:key=value filter.

  • tag-value - The value of a tag assigned to the resource. This filter is independent of the tag-key filter.

  • tenancy - The tenancy of an instance (dedicated | default).

  • virtualization-type - The virtualization type of the instance (paravirtual | hvm).

  • vpc-id - The ID of the VPC that the instance is running in.

  • network-interface.description - The description of the network interface.

  • network-interface.subnet-id - The ID of the subnet for the network interface.

  • network-interface.vpc-id - The ID of the VPC for the network interface.

  • network-interface.network-interface.id - The ID of the network interface.

  • network-interface.owner-id - The ID of the owner of the network interface.

  • network-interface.availability-zone - The Availability Zone for the network interface.

  • network-interface.requester-id - The requester ID for the network interface.

  • network-interface.requester-managed - Indicates whether the network interface is being managed by AWS.

  • network-interface.status - The status of the network interface (available) | in-use).

  • network-interface.mac-address - The MAC address of the network interface.

  • network-interface-private-dns-name - The private DNS name of the network interface.

  • network-interface.source-dest-check - Whether the network interface performs source/destination checking. A value of true means checking is enabled, and false means checking is disabled. The value must be false for the network interface to perform network address translation (NAT) in your VPC.

  • network-interface.group-id - The ID of a security group associated with the network interface.

  • network-interface.group-name - The name of a security group associated with the network interface.

  • network-interface.attachment.attachment-id - The ID of the interface attachment.

  • network-interface.attachment.instance-id - The ID of the instance to which the network interface is attached.

  • network-interface.attachment.instance-owner-id - The owner ID of the instance to which the network interface is attached.

  • network-interface.addresses.private-ip-address - The private IP address associated with the network interface.

  • network-interface.attachment.device-index - The device index to which the network interface is attached.

  • network-interface.attachment.status - The status of the attachment (attaching | attached | detaching | detached).

  • network-interface.attachment.attach-time - The time that the network interface was attached to an instance.

  • network-interface.attachment.delete-on-termination - Specifies whether the attachment is deleted when an instance is terminated.

  • network-interface.addresses.primary - Specifies whether the IP address of the network interface is the primary private IP address.

  • network-interface.addresses.association.public-ip - The ID of the association of an Elastic IP address with a network interface.

  • network-interface.addresses.association.ip-owner-id - The owner ID of the private IP address associated with the network interface.

  • association.public-ip - The address of the Elastic IP address bound to the network interface.

  • association.ip-owner-id - The owner of the Elastic IP address associated with the network interface.

  • association.allocation-id - The allocation ID returned when you allocated the Elastic IP address for your network interface.

  • association.association-id - The association ID returned when the network interface was associated with an IP address.

NOTE: This method appends the values to the existing list (if any). Use setFilters(java.util.Collection) or withFilters(java.util.Collection) if you want to override the existing values.

Returns a reference to this object so that method calls can be chained together.

Parameters:
filters One or more filters.
  • architecture - The instance architecture (i386 | x86_64).

  • availability-zone - The Availability Zone of the instance.

  • block-device-mapping.attach-time - The attach time for an EBS volume mapped to the instance, for example, 2010-09-15T17:15:20.000Z.

  • block-device-mapping.delete-on-termination - A Boolean that indicates whether the EBS volume is deleted on instance termination.

  • block-device-mapping.device-name - The device name for the EBS volume (for example, /dev/sdh or xvdh).

  • block-device-mapping.status - The status for the EBS volume (attaching | attached | detaching | detached).

  • block-device-mapping.volume-id - The volume ID of the EBS volume.

  • client-token - The idempotency token you provided when you launched the instance.

  • dns-name - The public DNS name of the instance.

  • group-id - The ID of the security group for the instance. EC2-Classic only.

  • group-name - The name of the security group for the instance. EC2-Classic only.

  • hypervisor - The hypervisor type of the instance (ovm | xen).

  • iam-instance-profile.arn - The instance profile associated with the instance. Specified as an ARN.

  • image-id - The ID of the image used to launch the instance.

  • instance-id - The ID of the instance.

  • instance-lifecycle - Indicates whether this is a Spot Instance (spot).

  • instance-state-code - The state of the instance, as a 16-bit unsigned integer. The high byte is an opaque internal value and should be ignored. The low byte is set based on the state represented. The valid values are: 0 (pending), 16 (running), 32 (shutting-down), 48 (terminated), 64 (stopping), and 80 (stopped).

  • instance-state-name - The state of the instance (pending | running | shutting-down | terminated | stopping | stopped).

  • instance-type - The type of instance (for example, t2.micro).

  • instance.group-id - The ID of the security group for the instance.

  • instance.group-name - The name of the security group for the instance.

  • ip-address - The public IP address of the instance.

  • kernel-id - The kernel ID.

  • key-name - The name of the key pair used when the instance was launched.

  • launch-index - When launching multiple instances, this is the index for the instance in the launch group (for example, 0, 1, 2, and so on).

  • launch-time - The time when the instance was launched.

  • monitoring-state - Indicates whether monitoring is enabled for the instance (disabled | enabled).

  • owner-id - The AWS account ID of the instance owner.

  • placement-group-name - The name of the placement group for the instance.

  • platform - The platform. Use windows if you have Windows instances; otherwise, leave blank.

  • private-dns-name - The private DNS name of the instance.

  • private-ip-address - The private IP address of the instance.

  • product-code - The product code associated with the AMI used to launch the instance.

  • product-code.type - The type of product code (devpay | marketplace).

  • ramdisk-id - The RAM disk ID.

  • reason - The reason for the current state of the instance (for example, shows "User Initiated [date]" when you stop or terminate the instance). Similar to the state-reason-code filter.

  • requester-id - The ID of the entity that launched the instance on your behalf (for example, AWS Management Console, Auto Scaling, and so on).

  • reservation-id - The ID of the instance's reservation. A reservation ID is created any time you launch an instance. A reservation ID has a one-to-one relationship with an instance launch request, but can be associated with more than one instance if you launch multiple instances using the same launch request. For example, if you launch one instance, you'll get one reservation ID. If you launch ten instances using the same launch request, you'll also get one reservation ID.

  • root-device-name - The name of the root device for the instance (for example, /dev/sda1 or /dev/xvda).

  • root-device-type - The type of root device that the instance uses (ebs | instance-store).

  • source-dest-check - Indicates whether the instance performs source/destination checking. A value of true means that checking is enabled, and false means checking is disabled. The value must be false for the instance to perform network address translation (NAT) in your VPC.

  • spot-instance-request-id - The ID of the Spot Instance request.

  • state-reason-code - The reason code for the state change.

  • state-reason-message - A message that describes the state change.

  • subnet-id - The ID of the subnet for the instance.

  • tag:key=value - The key/value combination of a tag assigned to the resource, where tag:key is the tag's key.

  • tag-key - The key of a tag assigned to the resource. This filter is independent of the tag-value filter. For example, if you use both the filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources assigned both the tag key Purpose (regardless of what the tag's value is), and the tag value X (regardless of what the tag's key is). If you want to list only resources where Purpose is X, see the tag:key=value filter.

  • tag-value - The value of a tag assigned to the resource. This filter is independent of the tag-key filter.

  • tenancy - The tenancy of an instance (dedicated | default).

  • virtualization-type - The virtualization type of the instance (paravirtual | hvm).

  • vpc-id - The ID of the VPC that the instance is running in.

  • network-interface.description - The description of the network interface.

  • network-interface.subnet-id - The ID of the subnet for the network interface.

  • network-interface.vpc-id - The ID of the VPC for the network interface.

  • network-interface.network-interface.id - The ID of the network interface.

  • network-interface.owner-id - The ID of the owner of the network interface.

  • network-interface.availability-zone - The Availability Zone for the network interface.

  • network-interface.requester-id - The requester ID for the network interface.

  • network-interface.requester-managed - Indicates whether the network interface is being managed by AWS.

  • network-interface.status - The status of the network interface (available) | in-use).

  • network-interface.mac-address - The MAC address of the network interface.

  • network-interface-private-dns-name - The private DNS name of the network interface.

  • network-interface.source-dest-check - Whether the network interface performs source/destination checking. A value of true means checking is enabled, and false means checking is disabled. The value must be false for the network interface to perform network address translation (NAT) in your VPC.

  • network-interface.group-id - The ID of a security group associated with the network interface.

  • network-interface.group-name - The name of a security group associated with the network interface.

  • network-interface.attachment.attachment-id - The ID of the interface attachment.

  • network-interface.attachment.instance-id - The ID of the instance to which the network interface is attached.

  • network-interface.attachment.instance-owner-id - The owner ID of the instance to which the network interface is attached.

  • network-interface.addresses.private-ip-address - The private IP address associated with the network interface.

  • network-interface.attachment.device-index - The device index to which the network interface is attached.

  • network-interface.attachment.status - The status of the attachment (attaching | attached | detaching | detached).

  • network-interface.attachment.attach-time - The time that the network interface was attached to an instance.

  • network-interface.attachment.delete-on-termination - Specifies whether the attachment is deleted when an instance is terminated.

  • network-interface.addresses.primary - Specifies whether the IP address of the network interface is the primary private IP address.

  • network-interface.addresses.association.public-ip - The ID of the association of an Elastic IP address with a network interface.

  • network-interface.addresses.association.ip-owner-id - The owner ID of the private IP address associated with the network interface.

  • association.public-ip - The address of the Elastic IP address bound to the network interface.

  • association.ip-owner-id - The owner of the Elastic IP address associated with the network interface.

  • association.allocation-id - The allocation ID returned when you allocated the Elastic IP address for your network interface.

  • association.association-id - The association ID returned when the network interface was associated with an IP address.

Returns:
A reference to this updated object so that method calls can be chained together.
    public DescribeInstancesRequest withFilters(Filter... filters) {
        if (getFilters() == nullsetFilters(new java.util.ArrayList<Filter>(filters.length));
        for (Filter value : filters) {
            getFilters().add(value);
        }
        return this;
    }
    
    
One or more filters.
  • architecture - The instance architecture (i386 | x86_64).

  • availability-zone - The Availability Zone of the instance.

  • block-device-mapping.attach-time - The attach time for an EBS volume mapped to the instance, for example, 2010-09-15T17:15:20.000Z.

  • block-device-mapping.delete-on-termination - A Boolean that indicates whether the EBS volume is deleted on instance termination.

  • block-device-mapping.device-name - The device name for the EBS volume (for example, /dev/sdh or xvdh).

  • block-device-mapping.status - The status for the EBS volume (attaching | attached | detaching | detached).

  • block-device-mapping.volume-id - The volume ID of the EBS volume.

  • client-token - The idempotency token you provided when you launched the instance.

  • dns-name - The public DNS name of the instance.

  • group-id - The ID of the security group for the instance. EC2-Classic only.

  • group-name - The name of the security group for the instance. EC2-Classic only.

  • hypervisor - The hypervisor type of the instance (ovm | xen).

  • iam-instance-profile.arn - The instance profile associated with the instance. Specified as an ARN.

  • image-id - The ID of the image used to launch the instance.

  • instance-id - The ID of the instance.

  • instance-lifecycle - Indicates whether this is a Spot Instance (spot).

  • instance-state-code - The state of the instance, as a 16-bit unsigned integer. The high byte is an opaque internal value and should be ignored. The low byte is set based on the state represented. The valid values are: 0 (pending), 16 (running), 32 (shutting-down), 48 (terminated), 64 (stopping), and 80 (stopped).

  • instance-state-name - The state of the instance (pending | running | shutting-down | terminated | stopping | stopped).

  • instance-type - The type of instance (for example, t2.micro).

  • instance.group-id - The ID of the security group for the instance.

  • instance.group-name - The name of the security group for the instance.

  • ip-address - The public IP address of the instance.

  • kernel-id - The kernel ID.

  • key-name - The name of the key pair used when the instance was launched.

  • launch-index - When launching multiple instances, this is the index for the instance in the launch group (for example, 0, 1, 2, and so on).

  • launch-time - The time when the instance was launched.

  • monitoring-state - Indicates whether monitoring is enabled for the instance (disabled | enabled).

  • owner-id - The AWS account ID of the instance owner.

  • placement-group-name - The name of the placement group for the instance.

  • platform - The platform. Use windows if you have Windows instances; otherwise, leave blank.

  • private-dns-name - The private DNS name of the instance.

  • private-ip-address - The private IP address of the instance.

  • product-code - The product code associated with the AMI used to launch the instance.

  • product-code.type - The type of product code (devpay | marketplace).

  • ramdisk-id - The RAM disk ID.

  • reason - The reason for the current state of the instance (for example, shows "User Initiated [date]" when you stop or terminate the instance). Similar to the state-reason-code filter.

  • requester-id - The ID of the entity that launched the instance on your behalf (for example, AWS Management Console, Auto Scaling, and so on).

  • reservation-id - The ID of the instance's reservation. A reservation ID is created any time you launch an instance. A reservation ID has a one-to-one relationship with an instance launch request, but can be associated with more than one instance if you launch multiple instances using the same launch request. For example, if you launch one instance, you'll get one reservation ID. If you launch ten instances using the same launch request, you'll also get one reservation ID.

  • root-device-name - The name of the root device for the instance (for example, /dev/sda1 or /dev/xvda).

  • root-device-type - The type of root device that the instance uses (ebs | instance-store).

  • source-dest-check - Indicates whether the instance performs source/destination checking. A value of true means that checking is enabled, and false means checking is disabled. The value must be false for the instance to perform network address translation (NAT) in your VPC.

  • spot-instance-request-id - The ID of the Spot Instance request.

  • state-reason-code - The reason code for the state change.

  • state-reason-message - A message that describes the state change.

  • subnet-id - The ID of the subnet for the instance.

  • tag:key=value - The key/value combination of a tag assigned to the resource, where tag:key is the tag's key.

  • tag-key - The key of a tag assigned to the resource. This filter is independent of the tag-value filter. For example, if you use both the filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources assigned both the tag key Purpose (regardless of what the tag's value is), and the tag value X (regardless of what the tag's key is). If you want to list only resources where Purpose is X, see the tag:key=value filter.

  • tag-value - The value of a tag assigned to the resource. This filter is independent of the tag-key filter.

  • tenancy - The tenancy of an instance (dedicated | default).

  • virtualization-type - The virtualization type of the instance (paravirtual | hvm).

  • vpc-id - The ID of the VPC that the instance is running in.

  • network-interface.description - The description of the network interface.

  • network-interface.subnet-id - The ID of the subnet for the network interface.

  • network-interface.vpc-id - The ID of the VPC for the network interface.

  • network-interface.network-interface.id - The ID of the network interface.

  • network-interface.owner-id - The ID of the owner of the network interface.

  • network-interface.availability-zone - The Availability Zone for the network interface.

  • network-interface.requester-id - The requester ID for the network interface.

  • network-interface.requester-managed - Indicates whether the network interface is being managed by AWS.

  • network-interface.status - The status of the network interface (available) | in-use).

  • network-interface.mac-address - The MAC address of the network interface.

  • network-interface-private-dns-name - The private DNS name of the network interface.

  • network-interface.source-dest-check - Whether the network interface performs source/destination checking. A value of true means checking is enabled, and false means checking is disabled. The value must be false for the network interface to perform network address translation (NAT) in your VPC.

  • network-interface.group-id - The ID of a security group associated with the network interface.

  • network-interface.group-name - The name of a security group associated with the network interface.

  • network-interface.attachment.attachment-id - The ID of the interface attachment.

  • network-interface.attachment.instance-id - The ID of the instance to which the network interface is attached.

  • network-interface.attachment.instance-owner-id - The owner ID of the instance to which the network interface is attached.

  • network-interface.addresses.private-ip-address - The private IP address associated with the network interface.

  • network-interface.attachment.device-index - The device index to which the network interface is attached.

  • network-interface.attachment.status - The status of the attachment (attaching | attached | detaching | detached).

  • network-interface.attachment.attach-time - The time that the network interface was attached to an instance.

  • network-interface.attachment.delete-on-termination - Specifies whether the attachment is deleted when an instance is terminated.

  • network-interface.addresses.primary - Specifies whether the IP address of the network interface is the primary private IP address.

  • network-interface.addresses.association.public-ip - The ID of the association of an Elastic IP address with a network interface.

  • network-interface.addresses.association.ip-owner-id - The owner ID of the private IP address associated with the network interface.

  • association.public-ip - The address of the Elastic IP address bound to the network interface.

  • association.ip-owner-id - The owner of the Elastic IP address associated with the network interface.

  • association.allocation-id - The allocation ID returned when you allocated the Elastic IP address for your network interface.

  • association.association-id - The association ID returned when the network interface was associated with an IP address.

Returns a reference to this object so that method calls can be chained together.

Parameters:
filters One or more filters.
  • architecture - The instance architecture (i386 | x86_64).

  • availability-zone - The Availability Zone of the instance.

  • block-device-mapping.attach-time - The attach time for an EBS volume mapped to the instance, for example, 2010-09-15T17:15:20.000Z.

  • block-device-mapping.delete-on-termination - A Boolean that indicates whether the EBS volume is deleted on instance termination.

  • block-device-mapping.device-name - The device name for the EBS volume (for example, /dev/sdh or xvdh).

  • block-device-mapping.status - The status for the EBS volume (attaching | attached | detaching | detached).

  • block-device-mapping.volume-id - The volume ID of the EBS volume.

  • client-token - The idempotency token you provided when you launched the instance.

  • dns-name - The public DNS name of the instance.

  • group-id - The ID of the security group for the instance. EC2-Classic only.

  • group-name - The name of the security group for the instance. EC2-Classic only.

  • hypervisor - The hypervisor type of the instance (ovm | xen).

  • iam-instance-profile.arn - The instance profile associated with the instance. Specified as an ARN.

  • image-id - The ID of the image used to launch the instance.

  • instance-id - The ID of the instance.

  • instance-lifecycle - Indicates whether this is a Spot Instance (spot).

  • instance-state-code - The state of the instance, as a 16-bit unsigned integer. The high byte is an opaque internal value and should be ignored. The low byte is set based on the state represented. The valid values are: 0 (pending), 16 (running), 32 (shutting-down), 48 (terminated), 64 (stopping), and 80 (stopped).

  • instance-state-name - The state of the instance (pending | running | shutting-down | terminated | stopping | stopped).

  • instance-type - The type of instance (for example, t2.micro).

  • instance.group-id - The ID of the security group for the instance.

  • instance.group-name - The name of the security group for the instance.

  • ip-address - The public IP address of the instance.

  • kernel-id - The kernel ID.

  • key-name - The name of the key pair used when the instance was launched.

  • launch-index - When launching multiple instances, this is the index for the instance in the launch group (for example, 0, 1, 2, and so on).

  • launch-time - The time when the instance was launched.

  • monitoring-state - Indicates whether monitoring is enabled for the instance (disabled | enabled).

  • owner-id - The AWS account ID of the instance owner.

  • placement-group-name - The name of the placement group for the instance.

  • platform - The platform. Use windows if you have Windows instances; otherwise, leave blank.

  • private-dns-name - The private DNS name of the instance.

  • private-ip-address - The private IP address of the instance.

  • product-code - The product code associated with the AMI used to launch the instance.

  • product-code.type - The type of product code (devpay | marketplace).

  • ramdisk-id - The RAM disk ID.

  • reason - The reason for the current state of the instance (for example, shows "User Initiated [date]" when you stop or terminate the instance). Similar to the state-reason-code filter.

  • requester-id - The ID of the entity that launched the instance on your behalf (for example, AWS Management Console, Auto Scaling, and so on).

  • reservation-id - The ID of the instance's reservation. A reservation ID is created any time you launch an instance. A reservation ID has a one-to-one relationship with an instance launch request, but can be associated with more than one instance if you launch multiple instances using the same launch request. For example, if you launch one instance, you'll get one reservation ID. If you launch ten instances using the same launch request, you'll also get one reservation ID.

  • root-device-name - The name of the root device for the instance (for example, /dev/sda1 or /dev/xvda).

  • root-device-type - The type of root device that the instance uses (ebs | instance-store).

  • source-dest-check - Indicates whether the instance performs source/destination checking. A value of true means that checking is enabled, and false means checking is disabled. The value must be false for the instance to perform network address translation (NAT) in your VPC.

  • spot-instance-request-id - The ID of the Spot Instance request.

  • state-reason-code - The reason code for the state change.

  • state-reason-message - A message that describes the state change.

  • subnet-id - The ID of the subnet for the instance.

  • tag:key=value - The key/value combination of a tag assigned to the resource, where tag:key is the tag's key.

  • tag-key - The key of a tag assigned to the resource. This filter is independent of the tag-value filter. For example, if you use both the filter "tag-key=Purpose" and the filter "tag-value=X", you get any resources assigned both the tag key Purpose (regardless of what the tag's value is), and the tag value X (regardless of what the tag's key is). If you want to list only resources where Purpose is X, see the tag:key=value filter.

  • tag-value - The value of a tag assigned to the resource. This filter is independent of the tag-key filter.

  • tenancy - The tenancy of an instance (dedicated | default).

  • virtualization-type - The virtualization type of the instance (paravirtual | hvm).

  • vpc-id - The ID of the VPC that the instance is running in.

  • network-interface.description - The description of the network interface.

  • network-interface.subnet-id - The ID of the subnet for the network interface.

  • network-interface.vpc-id - The ID of the VPC for the network interface.

  • network-interface.network-interface.id - The ID of the network interface.

  • network-interface.owner-id - The ID of the owner of the network interface.

  • network-interface.availability-zone - The Availability Zone for the network interface.

  • network-interface.requester-id - The requester ID for the network interface.

  • network-interface.requester-managed - Indicates whether the network interface is being managed by AWS.

  • network-interface.status - The status of the network interface (available) | in-use).

  • network-interface.mac-address - The MAC address of the network interface.

  • network-interface-private-dns-name - The private DNS name of the network interface.

  • network-interface.source-dest-check - Whether the network interface performs source/destination checking. A value of true means checking is enabled, and false means checking is disabled. The value must be false for the network interface to perform network address translation (NAT) in your VPC.

  • network-interface.group-id - The ID of a security group associated with the network interface.

  • network-interface.group-name - The name of a security group associated with the network interface.

  • network-interface.attachment.attachment-id - The ID of the interface attachment.

  • network-interface.attachment.instance-id - The ID of the instance to which the network interface is attached.

  • network-interface.attachment.instance-owner-id - The owner ID of the instance to which the network interface is attached.

  • network-interface.addresses.private-ip-address - The private IP address associated with the network interface.

  • network-interface.attachment.device-index - The device index to which the network interface is attached.

  • network-interface.attachment.status - The status of the attachment (attaching | attached | detaching | detached).

  • network-interface.attachment.attach-time - The time that the network interface was attached to an instance.

  • network-interface.attachment.delete-on-termination - Specifies whether the attachment is deleted when an instance is terminated.

  • network-interface.addresses.primary - Specifies whether the IP address of the network interface is the primary private IP address.

  • network-interface.addresses.association.public-ip - The ID of the association of an Elastic IP address with a network interface.

  • network-interface.addresses.association.ip-owner-id - The owner ID of the private IP address associated with the network interface.

  • association.public-ip - The address of the Elastic IP address bound to the network interface.

  • association.ip-owner-id - The owner of the Elastic IP address associated with the network interface.

  • association.allocation-id - The allocation ID returned when you allocated the Elastic IP address for your network interface.

  • association.association-id - The association ID returned when the network interface was associated with an IP address.

Returns:
A reference to this updated object so that method calls can be chained together.
        if (filters == null) {
            this. = null;
        } else {
            filtersCopy.addAll(filters);
            this. = filtersCopy;
        }
        return this;
    }

    
The token to request the next page of results.

Returns:
The token to request the next page of results.
    public String getNextToken() {
        return ;
    }
    
    
The token to request the next page of results.

Parameters:
nextToken The token to request the next page of results.
    public void setNextToken(String nextToken) {
        this. = nextToken;
    }
    
    
The token to request the next page of results.

Returns a reference to this object so that method calls can be chained together.

Parameters:
nextToken The token to request the next page of results.
Returns:
A reference to this updated object so that method calls can be chained together.
    public DescribeInstancesRequest withNextToken(String nextToken) {
        this. = nextToken;
        return this;
    }

    
The maximum number of results to return for the request in a single page. The remaining results of the initial request can be seen by sending another request with the returned NextToken value. This value can be between 5 and 1000; if MaxResults is given a value larger than 1000, only 1000 results are returned. You cannot specify this parameter and the instance IDs parameter in the same request.

Returns:
The maximum number of results to return for the request in a single page. The remaining results of the initial request can be seen by sending another request with the returned NextToken value. This value can be between 5 and 1000; if MaxResults is given a value larger than 1000, only 1000 results are returned. You cannot specify this parameter and the instance IDs parameter in the same request.
    public Integer getMaxResults() {
        return ;
    }
    
    
The maximum number of results to return for the request in a single page. The remaining results of the initial request can be seen by sending another request with the returned NextToken value. This value can be between 5 and 1000; if MaxResults is given a value larger than 1000, only 1000 results are returned. You cannot specify this parameter and the instance IDs parameter in the same request.

Parameters:
maxResults The maximum number of results to return for the request in a single page. The remaining results of the initial request can be seen by sending another request with the returned NextToken value. This value can be between 5 and 1000; if MaxResults is given a value larger than 1000, only 1000 results are returned. You cannot specify this parameter and the instance IDs parameter in the same request.
    public void setMaxResults(Integer maxResults) {
        this. = maxResults;
    }
    
    
The maximum number of results to return for the request in a single page. The remaining results of the initial request can be seen by sending another request with the returned NextToken value. This value can be between 5 and 1000; if MaxResults is given a value larger than 1000, only 1000 results are returned. You cannot specify this parameter and the instance IDs parameter in the same request.

Returns a reference to this object so that method calls can be chained together.

Parameters:
maxResults The maximum number of results to return for the request in a single page. The remaining results of the initial request can be seen by sending another request with the returned NextToken value. This value can be between 5 and 1000; if MaxResults is given a value larger than 1000, only 1000 results are returned. You cannot specify this parameter and the instance IDs parameter in the same request.
Returns:
A reference to this updated object so that method calls can be chained together.
    public DescribeInstancesRequest withMaxResults(Integer maxResults) {
        this. = maxResults;
        return this;
    }

    
This method is intended for internal use only. Returns the marshaled request configured with additional parameters to enable operation dry-run.
    @Override
        request.addParameter("DryRun", Boolean.toString(true));
        return request;
    }
    
    
Returns a string representation of this object; useful for testing and debugging.

Returns:
A string representation of this object.
See also:
java.lang.Object.toString()
    @Override
    public String toString() {
        StringBuilder sb = new StringBuilder();
        sb.append("{");
        if (getInstanceIds() != nullsb.append("InstanceIds: " + getInstanceIds() + ",");
        if (getFilters() != nullsb.append("Filters: " + getFilters() + ",");
        if (getNextToken() != nullsb.append("NextToken: " + getNextToken() + ",");
        if (getMaxResults() != nullsb.append("MaxResults: " + getMaxResults() );
        sb.append("}");
        return sb.toString();
    }
    
    @Override
    public int hashCode() {
        final int prime = 31;
        int hashCode = 1;
        
        hashCode = prime * hashCode + ((getInstanceIds() == null) ? 0 : getInstanceIds().hashCode()); 
        hashCode = prime * hashCode + ((getFilters() == null) ? 0 : getFilters().hashCode()); 
        hashCode = prime * hashCode + ((getNextToken() == null) ? 0 : getNextToken().hashCode()); 
        hashCode = prime * hashCode + ((getMaxResults() == null) ? 0 : getMaxResults().hashCode()); 
        return hashCode;
    }
    
    @Override
    public boolean equals(Object obj) {
        if (this == objreturn true;
        if (obj == nullreturn false;
        if (obj instanceof DescribeInstancesRequest == falsereturn false;
        
        if (other.getInstanceIds() == null ^ this.getInstanceIds() == nullreturn false;
        if (other.getInstanceIds() != null && other.getInstanceIds().equals(this.getInstanceIds()) == falsereturn false
        if (other.getFilters() == null ^ this.getFilters() == nullreturn false;
        if (other.getFilters() != null && other.getFilters().equals(this.getFilters()) == falsereturn false
        if (other.getNextToken() == null ^ this.getNextToken() == nullreturn false;
        if (other.getNextToken() != null && other.getNextToken().equals(this.getNextToken()) == falsereturn false
        if (other.getMaxResults() == null ^ this.getMaxResults() == nullreturn false;
        if (other.getMaxResults() != null && other.getMaxResults().equals(this.getMaxResults()) == falsereturn false
        return true;
    }
    
    @Override
    public DescribeInstancesRequest clone() {
        
            return (DescribeInstancesRequestsuper.clone();
    }
}
    
New to GrepCode? Check out our FAQ X