Start line:  
End line:  

Snippet Preview

Snippet HTML Code

Stack Overflow Questions
   /*
    * Copyright 2010-2015 Amazon.com, Inc. or its affiliates. All Rights Reserved.
    * 
    * Licensed under the Apache License, Version 2.0 (the "License").
    * You may not use this file except in compliance with the License.
    * A copy of the License is located at
    * 
    *  http://aws.amazon.com/apache2.0
    * 
   * or in the "license" file accompanying this file. This file is distributed
   * on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
   * express or implied. See the License for the specific language governing
   * permissions and limitations under the License.
   */
  package com.amazonaws.services.support;
  
  import java.net.*;
  import java.util.*;
  
  
  import com.amazonaws.*;
  
Client for accessing AWSSupport. All service calls made using this client are blocking, and will not return until the service call completes.

AWS Support

The AWS Support API reference is intended for programmers who need detailed information about the AWS Support operations and data types. This service enables you to manage your AWS Support cases programmatically. It uses HTTP methods that return results in JSON format.

The AWS Support service also exposes a set of Trusted Advisor features. You can retrieve a list of checks and their descriptions, get check results, specify checks to refresh, and get the refresh status of checks.

The following list describes the AWS Support case management operations:

  • Service names, issue categories, and available severity levels. The DescribeServices and DescribeSeverityLevels operations return AWS service names, service codes, service categories, and problem severity levels. You use these values when you call the CreateCase operation.
  • Case creation, case details, and case resolution. The CreateCase, DescribeCases, DescribeAttachment, and ResolveCase operations create AWS Support cases, retrieve information about cases, and resolve cases.
  • Case communication. The DescribeCommunications, AddCommunicationToCase, and AddAttachmentsToSet operations retrieve and add communications and attachments to AWS Support cases.

The following list describes the operations available from the AWS Support service for Trusted Advisor:

  • DescribeTrustedAdvisorChecks returns the list of checks that run against your AWS resources.
  • Using the CheckId for a specific check returned by DescribeTrustedAdvisorChecks, you can call DescribeTrustedAdvisorCheckResult to obtain the results for the check you specified.
  • DescribeTrustedAdvisorCheckSummaries returns summarized results for one or more Trusted Advisor checks.
  • RefreshTrustedAdvisorCheck requests that Trusted Advisor rerun a specified check.
  • DescribeTrustedAdvisorCheckRefreshStatuses reports the refresh status of one or more checks.

For authentication of requests, AWS Support uses Signature Version 4 Signing Process .

See About the AWS Support API in the AWS Support User Guide for information about how to use this service to create and manage your support cases, and how to call Trusted Advisor for results of checks on your resources.

 
 public class AWSSupportClient extends AmazonWebServiceClient implements AWSSupport {

    
Provider for AWS credentials.
 
 
     private static final Log log = LogFactory.getLog(AWSSupport.class);

    
List of exception unmarshallers for all AWSSupport exceptions.
 
     protected List<JsonErrorUnmarshallerjsonErrorUnmarshallers;

    
Constructs a new client to invoke service methods on AWSSupport. A credentials provider chain will be used that searches for credentials in this order:
  • Environment Variables - AWS_ACCESS_KEY_ID and AWS_SECRET_KEY
  • Java System Properties - aws.accessKeyId and aws.secretKey
  • Instance profile credentials delivered through the Amazon EC2 metadata service

All service calls made using this new client object are blocking, and will not return until the service call completes.

 
     public AWSSupportClient() {
         this(new DefaultAWSCredentialsProviderChain(), new ClientConfiguration());
     }

    
Constructs a new client to invoke service methods on AWSSupport. A credentials provider chain will be used that searches for credentials in this order:
  • Environment Variables - AWS_ACCESS_KEY_ID and AWS_SECRET_KEY
  • Java System Properties - aws.accessKeyId and aws.secretKey
  • Instance profile credentials delivered through the Amazon EC2 metadata service

All service calls made using this new client object are blocking, and will not return until the service call completes.

Parameters:
clientConfiguration The client configuration options controlling how this client connects to AWSSupport (ex: proxy settings, retry counts, etc.).
See also:
com.amazonaws.auth.DefaultAWSCredentialsProviderChain
 
     public AWSSupportClient(ClientConfiguration clientConfiguration) {
         this(new DefaultAWSCredentialsProviderChain(), clientConfiguration);
     }

    
Constructs a new client to invoke service methods on AWSSupport using the specified AWS account credentials.

All service calls made using this new client object are blocking, and will not return until the service call completes.

Parameters:
awsCredentials The AWS credentials (access key ID and secret key) to use when authenticating with AWS services.
 
     public AWSSupportClient(AWSCredentials awsCredentials) {
         this(awsCredentialsnew ClientConfiguration());
     }

    
Constructs a new client to invoke service methods on AWSSupport using the specified AWS account credentials and client configuration options.

All service calls made using this new client object are blocking, and will not return until the service call completes.

Parameters:
awsCredentials The AWS credentials (access key ID and secret key) to use when authenticating with AWS services.
clientConfiguration The client configuration options controlling how this client connects to AWSSupport (ex: proxy settings, retry counts, etc.).
 
     public AWSSupportClient(AWSCredentials awsCredentialsClientConfiguration clientConfiguration) {
         super(adjustClientConfiguration(clientConfiguration));
         
         this. = new StaticCredentialsProvider(awsCredentials);
         
         init();
     }

    
Constructs a new client to invoke service methods on AWSSupport using the specified AWS account credentials provider.

All service calls made using this new client object are blocking, and will not return until the service call completes.

Parameters:
awsCredentialsProvider The AWS credentials provider which will provide credentials to authenticate requests with AWS services.
 
     public AWSSupportClient(AWSCredentialsProvider awsCredentialsProvider) {
         this(awsCredentialsProvidernew ClientConfiguration());
     }

    
Constructs a new client to invoke service methods on AWSSupport using the specified AWS account credentials provider and client configuration options.

All service calls made using this new client object are blocking, and will not return until the service call completes.

Parameters:
awsCredentialsProvider The AWS credentials provider which will provide credentials to authenticate requests with AWS services.
clientConfiguration The client configuration options controlling how this client connects to AWSSupport (ex: proxy settings, retry counts, etc.).
 
     public AWSSupportClient(AWSCredentialsProvider awsCredentialsProviderClientConfiguration clientConfiguration) {
         this(awsCredentialsProviderclientConfigurationnull);
     }

    
Constructs a new client to invoke service methods on AWSSupport using the specified AWS account credentials provider, client configuration options and request metric collector.

All service calls made using this new client object are blocking, and will not return until the service call completes.

Parameters:
awsCredentialsProvider The AWS credentials provider which will provide credentials to authenticate requests with AWS services.
clientConfiguration The client configuration options controlling how this client connects to AWSSupport (ex: proxy settings, retry counts, etc.).
requestMetricCollector optional request metric collector
 
     public AWSSupportClient(AWSCredentialsProvider awsCredentialsProvider,
             ClientConfiguration clientConfiguration,
             RequestMetricCollector requestMetricCollector) {
         super(adjustClientConfiguration(clientConfiguration), requestMetricCollector);
         
         this. = awsCredentialsProvider;
         
         init();
     }
 
     private void init() {
         
         
         // calling this.setEndPoint(...) will also modify the signer accordingly
         this.setEndpoint("support.us-east-1.amazonaws.com");
         
         HandlerChainFactory chainFactory = new HandlerChainFactory();
         .addAll(chainFactory.newRequestHandlerChain(
                 "/com/amazonaws/services/support/request.handlers"));
         .addAll(chainFactory.newRequestHandler2Chain(
                 "/com/amazonaws/services/support/request.handler2s"));
     }
 
         ClientConfiguration config = orig;
         
         return config;
     }

    

Returns the refresh status of the Trusted Advisor checks that have the specified check IDs. Check IDs can be obtained by calling DescribeTrustedAdvisorChecks.

Parameters:
describeTrustedAdvisorCheckRefreshStatusesRequest Container for the necessary parameters to execute the DescribeTrustedAdvisorCheckRefreshStatuses service method on AWSSupport.
Returns:
The response from the DescribeTrustedAdvisorCheckRefreshStatuses service method, as returned by AWSSupport.
Throws:
com.amazonaws.services.support.model.InternalServerErrorException
com.amazonaws.AmazonClientException If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
com.amazonaws.AmazonServiceException If an error response is returned by AWSSupport indicating either a problem with the data in the request, or a server side issue.
 
         ExecutionContext executionContext = createExecutionContext(describeTrustedAdvisorCheckRefreshStatusesRequest);
         AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
         awsRequestMetrics.startEvent(.);
         Response<DescribeTrustedAdvisorCheckRefreshStatusesResultresponse = null;
         
         try {
             awsRequestMetrics.startEvent(.);
             try {
                 request = new DescribeTrustedAdvisorCheckRefreshStatusesRequestMarshaller().marshall(super.beforeMarshalling(describeTrustedAdvisorCheckRefreshStatusesRequest));
                 // Binds the request metrics to the current request.
                 request.setAWSRequestMetrics(awsRequestMetrics);
             } finally {
                 awsRequestMetrics.endEvent(.);
             }
 
             JsonResponseHandler<DescribeTrustedAdvisorCheckRefreshStatusesResultresponseHandler =
                 new JsonResponseHandler<DescribeTrustedAdvisorCheckRefreshStatusesResult>(unmarshaller);
 
             response = invoke(requestresponseHandlerexecutionContext);
 
             return response.getAwsResponse();
         } finally {
             
             endClientExecution(awsRequestMetricsrequestresponse);
         }
     }

    

Returns a list of cases that you specify by passing one or more case IDs. In addition, you can filter the cases by date by setting values for the AfterTime and BeforeTime request parameters. You can set values for the IncludeResolvedCases and IncludeCommunications request parameters to control how much information is returned.

Case data is available for 12 months after creation. If a case was created more than 12 months ago, a request for data might cause an error.

The response returns the following in JSON format:

  1. One or more CaseDetails data types.
  2. One or more NextToken values, which specify where to paginate the returned records represented by the CaseDetails objects.

Parameters:
describeCasesRequest Container for the necessary parameters to execute the DescribeCases service method on AWSSupport.
Returns:
The response from the DescribeCases service method, as returned by AWSSupport.
Throws:
com.amazonaws.services.support.model.InternalServerErrorException
com.amazonaws.services.support.model.CaseIdNotFoundException
com.amazonaws.AmazonClientException If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
com.amazonaws.AmazonServiceException If an error response is returned by AWSSupport indicating either a problem with the data in the request, or a server side issue.
 
     public DescribeCasesResult describeCases(DescribeCasesRequest describeCasesRequest) {
         ExecutionContext executionContext = createExecutionContext(describeCasesRequest);
         AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
         awsRequestMetrics.startEvent(.);
         Request<DescribeCasesRequestrequest = null;
         Response<DescribeCasesResultresponse = null;
         
         try {
             awsRequestMetrics.startEvent(.);
             try {
                 request = new DescribeCasesRequestMarshaller().marshall(super.beforeMarshalling(describeCasesRequest));
                 // Binds the request metrics to the current request.
                 request.setAWSRequestMetrics(awsRequestMetrics);
             } finally {
                 awsRequestMetrics.endEvent(.);
             }
 
             Unmarshaller<DescribeCasesResultJsonUnmarshallerContextunmarshaller =
                 new DescribeCasesResultJsonUnmarshaller();
             JsonResponseHandler<DescribeCasesResultresponseHandler =
                 new JsonResponseHandler<DescribeCasesResult>(unmarshaller);
 
             response = invoke(requestresponseHandlerexecutionContext);
 
             return response.getAwsResponse();
         } finally {
             
             endClientExecution(awsRequestMetricsrequestresponse);
         }
     }

    

Adds one or more attachments to an attachment set. If an AttachmentSetId is not specified, a new attachment set is created, and the ID of the set is returned in the response. If an AttachmentSetId is specified, the attachments are added to the specified set, if it exists.

An attachment set is a temporary container for attachments that are to be added to a case or case communication. The set is available for one hour after it is created; the ExpiryTime returned in the response indicates when the set expires. The maximum number of attachments in a set is 3, and the maximum size of any attachment in the set is 5 MB.

Parameters:
addAttachmentsToSetRequest Container for the necessary parameters to execute the AddAttachmentsToSet service method on AWSSupport.
Returns:
The response from the AddAttachmentsToSet service method, as returned by AWSSupport.
Throws:
com.amazonaws.services.support.model.AttachmentSetIdNotFoundException
com.amazonaws.services.support.model.AttachmentLimitExceededException
com.amazonaws.services.support.model.AttachmentSetExpiredException
com.amazonaws.services.support.model.InternalServerErrorException
com.amazonaws.services.support.model.AttachmentSetSizeLimitExceededException
com.amazonaws.AmazonClientException If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
com.amazonaws.AmazonServiceException If an error response is returned by AWSSupport indicating either a problem with the data in the request, or a server side issue.
 
     public AddAttachmentsToSetResult addAttachmentsToSet(AddAttachmentsToSetRequest addAttachmentsToSetRequest) {
         ExecutionContext executionContext = createExecutionContext(addAttachmentsToSetRequest);
         AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
         awsRequestMetrics.startEvent(.);
         Request<AddAttachmentsToSetRequestrequest = null;
         Response<AddAttachmentsToSetResultresponse = null;
         
         try {
             awsRequestMetrics.startEvent(.);
             try {
                 request = new AddAttachmentsToSetRequestMarshaller().marshall(super.beforeMarshalling(addAttachmentsToSetRequest));
                 // Binds the request metrics to the current request.
                 request.setAWSRequestMetrics(awsRequestMetrics);
             } finally {
                 awsRequestMetrics.endEvent(.);
             }
 
             Unmarshaller<AddAttachmentsToSetResultJsonUnmarshallerContextunmarshaller =
                 new AddAttachmentsToSetResultJsonUnmarshaller();
             JsonResponseHandler<AddAttachmentsToSetResultresponseHandler =
                 new JsonResponseHandler<AddAttachmentsToSetResult>(unmarshaller);
 
             response = invoke(requestresponseHandlerexecutionContext);
 
             return response.getAwsResponse();
         } finally {
             
             endClientExecution(awsRequestMetricsrequestresponse);
         }
     }

    

Returns the list of severity levels that you can assign to an AWS Support case. The severity level for a case is also a field in the CaseDetails data type included in any CreateCase request.

Parameters:
describeSeverityLevelsRequest Container for the necessary parameters to execute the DescribeSeverityLevels service method on AWSSupport.
Returns:
The response from the DescribeSeverityLevels service method, as returned by AWSSupport.
Throws:
com.amazonaws.services.support.model.InternalServerErrorException
com.amazonaws.AmazonClientException If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
com.amazonaws.AmazonServiceException If an error response is returned by AWSSupport indicating either a problem with the data in the request, or a server side issue.
 
     public DescribeSeverityLevelsResult describeSeverityLevels(DescribeSeverityLevelsRequest describeSeverityLevelsRequest) {
         ExecutionContext executionContext = createExecutionContext(describeSeverityLevelsRequest);
         AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
         awsRequestMetrics.startEvent(.);
         Request<DescribeSeverityLevelsRequestrequest = null;
         Response<DescribeSeverityLevelsResultresponse = null;
         
         try {
             awsRequestMetrics.startEvent(.);
             try {
                 request = new DescribeSeverityLevelsRequestMarshaller().marshall(super.beforeMarshalling(describeSeverityLevelsRequest));
                 // Binds the request metrics to the current request.
                 request.setAWSRequestMetrics(awsRequestMetrics);
             } finally {
                 awsRequestMetrics.endEvent(.);
             }
 
             Unmarshaller<DescribeSeverityLevelsResultJsonUnmarshallerContextunmarshaller =
                 new DescribeSeverityLevelsResultJsonUnmarshaller();
             JsonResponseHandler<DescribeSeverityLevelsResultresponseHandler =
                 new JsonResponseHandler<DescribeSeverityLevelsResult>(unmarshaller);
 
             response = invoke(requestresponseHandlerexecutionContext);
 
             return response.getAwsResponse();
         } finally {
             
             endClientExecution(awsRequestMetricsrequestresponse);
         }
     }

    

Returns communications (and attachments) for one or more support cases. You can use the AfterTime and BeforeTime parameters to filter by date. You can use the CaseId parameter to restrict the results to a particular case.

Case data is available for 12 months after creation. If a case was created more than 12 months ago, a request for data might cause an error.

You can use the MaxResults and NextToken parameters to control the pagination of the result set. Set MaxResults to the number of cases you want displayed on each page, and use NextToken to specify the resumption of pagination.

Parameters:
describeCommunicationsRequest Container for the necessary parameters to execute the DescribeCommunications service method on AWSSupport.
Returns:
The response from the DescribeCommunications service method, as returned by AWSSupport.
Throws:
com.amazonaws.services.support.model.InternalServerErrorException
com.amazonaws.services.support.model.CaseIdNotFoundException
com.amazonaws.AmazonClientException If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
com.amazonaws.AmazonServiceException If an error response is returned by AWSSupport indicating either a problem with the data in the request, or a server side issue.
 
     public DescribeCommunicationsResult describeCommunications(DescribeCommunicationsRequest describeCommunicationsRequest) {
         ExecutionContext executionContext = createExecutionContext(describeCommunicationsRequest);
         AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
         awsRequestMetrics.startEvent(.);
         Request<DescribeCommunicationsRequestrequest = null;
         Response<DescribeCommunicationsResultresponse = null;
         
         try {
             awsRequestMetrics.startEvent(.);
             try {
                 request = new DescribeCommunicationsRequestMarshaller().marshall(super.beforeMarshalling(describeCommunicationsRequest));
                 // Binds the request metrics to the current request.
                 request.setAWSRequestMetrics(awsRequestMetrics);
             } finally {
                 awsRequestMetrics.endEvent(.);
             }
 
             Unmarshaller<DescribeCommunicationsResultJsonUnmarshallerContextunmarshaller =
                 new DescribeCommunicationsResultJsonUnmarshaller();
             JsonResponseHandler<DescribeCommunicationsResultresponseHandler =
                 new JsonResponseHandler<DescribeCommunicationsResult>(unmarshaller);
 
             response = invoke(requestresponseHandlerexecutionContext);
 
             return response.getAwsResponse();
         } finally {
             
             endClientExecution(awsRequestMetricsrequestresponse);
         }
     }

    

Returns the attachment that has the specified ID. Attachment IDs are generated by the case management system when you add an attachment to a case or case communication. Attachment IDs are returned in the AttachmentDetails objects that are returned by the DescribeCommunications operation.

Parameters:
describeAttachmentRequest Container for the necessary parameters to execute the DescribeAttachment service method on AWSSupport.
Returns:
The response from the DescribeAttachment service method, as returned by AWSSupport.
Throws:
com.amazonaws.services.support.model.DescribeAttachmentLimitExceededException
com.amazonaws.services.support.model.AttachmentIdNotFoundException
com.amazonaws.services.support.model.InternalServerErrorException
com.amazonaws.AmazonClientException If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
com.amazonaws.AmazonServiceException If an error response is returned by AWSSupport indicating either a problem with the data in the request, or a server side issue.
 
     public DescribeAttachmentResult describeAttachment(DescribeAttachmentRequest describeAttachmentRequest) {
         ExecutionContext executionContext = createExecutionContext(describeAttachmentRequest);
         AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
         awsRequestMetrics.startEvent(.);
         Request<DescribeAttachmentRequestrequest = null;
         Response<DescribeAttachmentResultresponse = null;
         
         try {
             awsRequestMetrics.startEvent(.);
             try {
                 request = new DescribeAttachmentRequestMarshaller().marshall(super.beforeMarshalling(describeAttachmentRequest));
                 // Binds the request metrics to the current request.
                 request.setAWSRequestMetrics(awsRequestMetrics);
             } finally {
                 awsRequestMetrics.endEvent(.);
             }
 
             Unmarshaller<DescribeAttachmentResultJsonUnmarshallerContextunmarshaller =
                 new DescribeAttachmentResultJsonUnmarshaller();
             JsonResponseHandler<DescribeAttachmentResultresponseHandler =
                 new JsonResponseHandler<DescribeAttachmentResult>(unmarshaller);
 
             response = invoke(requestresponseHandlerexecutionContext);
 
             return response.getAwsResponse();
         } finally {
             
             endClientExecution(awsRequestMetricsrequestresponse);
         }
     }

    

Takes a CaseId and returns the initial state of the case along with the state of the case after the call to ResolveCase completed.

Parameters:
resolveCaseRequest Container for the necessary parameters to execute the ResolveCase service method on AWSSupport.
Returns:
The response from the ResolveCase service method, as returned by AWSSupport.
Throws:
com.amazonaws.services.support.model.InternalServerErrorException
com.amazonaws.services.support.model.CaseIdNotFoundException
com.amazonaws.AmazonClientException If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
com.amazonaws.AmazonServiceException If an error response is returned by AWSSupport indicating either a problem with the data in the request, or a server side issue.
 
     public ResolveCaseResult resolveCase(ResolveCaseRequest resolveCaseRequest) {
         ExecutionContext executionContext = createExecutionContext(resolveCaseRequest);
         AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
         awsRequestMetrics.startEvent(.);
         Request<ResolveCaseRequestrequest = null;
         Response<ResolveCaseResultresponse = null;
         
         try {
             awsRequestMetrics.startEvent(.);
             try {
                 request = new ResolveCaseRequestMarshaller().marshall(super.beforeMarshalling(resolveCaseRequest));
                 // Binds the request metrics to the current request.
                 request.setAWSRequestMetrics(awsRequestMetrics);
             } finally {
                 awsRequestMetrics.endEvent(.);
             }
 
             Unmarshaller<ResolveCaseResultJsonUnmarshallerContextunmarshaller =
                 new ResolveCaseResultJsonUnmarshaller();
             JsonResponseHandler<ResolveCaseResultresponseHandler =
                 new JsonResponseHandler<ResolveCaseResult>(unmarshaller);
 
             response = invoke(requestresponseHandlerexecutionContext);
 
             return response.getAwsResponse();
         } finally {
             
             endClientExecution(awsRequestMetricsrequestresponse);
         }
     }

    

Returns the current list of AWS services and a list of service categories that applies to each one. You then use service names and categories in your CreateCase requests. Each AWS service has its own set of categories.

The service codes and category codes correspond to the values that are displayed in the Service and Category drop-down lists on the AWS Support Center Create Case page. The values in those fields, however, do not necessarily match the service codes and categories returned by the DescribeServices request. Always use the service codes and categories obtained programmatically. This practice ensures that you always have the most recent set of service and category codes.

Parameters:
describeServicesRequest Container for the necessary parameters to execute the DescribeServices service method on AWSSupport.
Returns:
The response from the DescribeServices service method, as returned by AWSSupport.
Throws:
com.amazonaws.services.support.model.InternalServerErrorException
com.amazonaws.AmazonClientException If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
com.amazonaws.AmazonServiceException If an error response is returned by AWSSupport indicating either a problem with the data in the request, or a server side issue.
 
     public DescribeServicesResult describeServices(DescribeServicesRequest describeServicesRequest) {
         ExecutionContext executionContext = createExecutionContext(describeServicesRequest);
         AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
         awsRequestMetrics.startEvent(.);
         Request<DescribeServicesRequestrequest = null;
         Response<DescribeServicesResultresponse = null;
         
         try {
             awsRequestMetrics.startEvent(.);
             try {
                 request = new DescribeServicesRequestMarshaller().marshall(super.beforeMarshalling(describeServicesRequest));
                 // Binds the request metrics to the current request.
                 request.setAWSRequestMetrics(awsRequestMetrics);
             } finally {
                 awsRequestMetrics.endEvent(.);
             }
 
             Unmarshaller<DescribeServicesResultJsonUnmarshallerContextunmarshaller =
                 new DescribeServicesResultJsonUnmarshaller();
             JsonResponseHandler<DescribeServicesResultresponseHandler =
                 new JsonResponseHandler<DescribeServicesResult>(unmarshaller);
 
             response = invoke(requestresponseHandlerexecutionContext);
 
             return response.getAwsResponse();
         } finally {
             
             endClientExecution(awsRequestMetricsrequestresponse);
         }
     }

    

Adds additional customer communication to an AWS Support case. You use the CaseId value to identify the case to add communication to. You can list a set of email addresses to copy on the communication using the CcEmailAddresses value. The CommunicationBody value contains the text of the communication.

The response indicates the success or failure of the request.

This operation implements a subset of the features of the AWS Support Center.

Parameters:
addCommunicationToCaseRequest Container for the necessary parameters to execute the AddCommunicationToCase service method on AWSSupport.
Returns:
The response from the AddCommunicationToCase service method, as returned by AWSSupport.
Throws:
com.amazonaws.services.support.model.AttachmentSetIdNotFoundException
com.amazonaws.services.support.model.AttachmentSetExpiredException
com.amazonaws.services.support.model.InternalServerErrorException
com.amazonaws.services.support.model.CaseIdNotFoundException
com.amazonaws.AmazonClientException If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
com.amazonaws.AmazonServiceException If an error response is returned by AWSSupport indicating either a problem with the data in the request, or a server side issue.
 
     public AddCommunicationToCaseResult addCommunicationToCase(AddCommunicationToCaseRequest addCommunicationToCaseRequest) {
         ExecutionContext executionContext = createExecutionContext(addCommunicationToCaseRequest);
         AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
         awsRequestMetrics.startEvent(.);
         Request<AddCommunicationToCaseRequestrequest = null;
         Response<AddCommunicationToCaseResultresponse = null;
         
         try {
             awsRequestMetrics.startEvent(.);
             try {
                 request = new AddCommunicationToCaseRequestMarshaller().marshall(super.beforeMarshalling(addCommunicationToCaseRequest));
                 // Binds the request metrics to the current request.
                 request.setAWSRequestMetrics(awsRequestMetrics);
             } finally {
                 awsRequestMetrics.endEvent(.);
             }
 
             Unmarshaller<AddCommunicationToCaseResultJsonUnmarshallerContextunmarshaller =
                 new AddCommunicationToCaseResultJsonUnmarshaller();
             JsonResponseHandler<AddCommunicationToCaseResultresponseHandler =
                 new JsonResponseHandler<AddCommunicationToCaseResult>(unmarshaller);
 
             response = invoke(requestresponseHandlerexecutionContext);
 
             return response.getAwsResponse();
         } finally {
             
             endClientExecution(awsRequestMetricsrequestresponse);
         }
     }

    

Creates a new case in the AWS Support Center. This operation is modeled on the behavior of the AWS Support Center Create Case page. Its parameters require you to specify the following information:

  1. IssueType. The type of issue for the case. You can specify either "customer-service" or "technical." If you do not indicate a value, the default is "technical."
  2. ServiceCode. The code for an AWS service. You obtain the ServiceCode by calling DescribeServices.
  3. CategoryCode. The category for the service defined for the ServiceCode value. You also obtain the category code for a service by calling DescribeServices. Each AWS service defines its own set of category codes.
  4. SeverityCode. A value that indicates the urgency of the case, which in turn determines the response time according to your service level agreement with AWS Support. You obtain the SeverityCode by calling DescribeSeverityLevels.
  5. Subject. The Subject field on the AWS Support Center Create Case page.
  6. CommunicationBody. The Description field on the AWS Support Center Create Case page.
  7. AttachmentSetId. The ID of a set of attachments that has been created by using AddAttachmentsToSet.
  8. Language. The human language in which AWS Support handles the case. English and Japanese are currently supported.
  9. CcEmailAddresses. The AWS Support Center CC field on the Create Case page. You can list email addresses to be copied on any correspondence about the case. The account that opens the case is already identified by passing the AWS Credentials in the HTTP POST method or in a method or function call from one of the programming languages supported by an AWS SDK .

NOTE: To add additional communication or attachments to an existing case, use AddCommunicationToCase.

A successful CreateCase request returns an AWS Support case number. Case numbers are used by the DescribeCases operation to retrieve existing AWS Support cases.

Parameters:
createCaseRequest Container for the necessary parameters to execute the CreateCase service method on AWSSupport.
Returns:
The response from the CreateCase service method, as returned by AWSSupport.
Throws:
com.amazonaws.services.support.model.AttachmentSetIdNotFoundException
com.amazonaws.services.support.model.AttachmentSetExpiredException
com.amazonaws.services.support.model.InternalServerErrorException
com.amazonaws.services.support.model.CaseCreationLimitExceededException
com.amazonaws.AmazonClientException If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
com.amazonaws.AmazonServiceException If an error response is returned by AWSSupport indicating either a problem with the data in the request, or a server side issue.
 
     public CreateCaseResult createCase(CreateCaseRequest createCaseRequest) {
         ExecutionContext executionContext = createExecutionContext(createCaseRequest);
         AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
         awsRequestMetrics.startEvent(.);
         Request<CreateCaseRequestrequest = null;
         Response<CreateCaseResultresponse = null;
         
         try {
             awsRequestMetrics.startEvent(.);
             try {
                 request = new CreateCaseRequestMarshaller().marshall(super.beforeMarshalling(createCaseRequest));
                 // Binds the request metrics to the current request.
                 request.setAWSRequestMetrics(awsRequestMetrics);
             } finally {
                 awsRequestMetrics.endEvent(.);
             }
 
             Unmarshaller<CreateCaseResultJsonUnmarshallerContextunmarshaller =
                 new CreateCaseResultJsonUnmarshaller();
             JsonResponseHandler<CreateCaseResultresponseHandler =
                 new JsonResponseHandler<CreateCaseResult>(unmarshaller);
 
             response = invoke(requestresponseHandlerexecutionContext);
 
             return response.getAwsResponse();
         } finally {
             
             endClientExecution(awsRequestMetricsrequestresponse);
         }
     }

    

Returns information about all available Trusted Advisor checks, including name, ID, category, description, and metadata. You must specify a language code; English ("en") and Japanese ("ja") are currently supported. The response contains a TrustedAdvisorCheckDescription for each check.

Parameters:
describeTrustedAdvisorChecksRequest Container for the necessary parameters to execute the DescribeTrustedAdvisorChecks service method on AWSSupport.
Returns:
The response from the DescribeTrustedAdvisorChecks service method, as returned by AWSSupport.
Throws:
com.amazonaws.services.support.model.InternalServerErrorException
com.amazonaws.AmazonClientException If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
com.amazonaws.AmazonServiceException If an error response is returned by AWSSupport indicating either a problem with the data in the request, or a server side issue.
 
         ExecutionContext executionContext = createExecutionContext(describeTrustedAdvisorChecksRequest);
         AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
         awsRequestMetrics.startEvent(.);
         Request<DescribeTrustedAdvisorChecksRequestrequest = null;
         Response<DescribeTrustedAdvisorChecksResultresponse = null;
         
         try {
             awsRequestMetrics.startEvent(.);
            try {
                request = new DescribeTrustedAdvisorChecksRequestMarshaller().marshall(super.beforeMarshalling(describeTrustedAdvisorChecksRequest));
                // Binds the request metrics to the current request.
                request.setAWSRequestMetrics(awsRequestMetrics);
            } finally {
                awsRequestMetrics.endEvent(.);
            }
                new DescribeTrustedAdvisorChecksResultJsonUnmarshaller();
            JsonResponseHandler<DescribeTrustedAdvisorChecksResultresponseHandler =
                new JsonResponseHandler<DescribeTrustedAdvisorChecksResult>(unmarshaller);
            response = invoke(requestresponseHandlerexecutionContext);
            return response.getAwsResponse();
        } finally {
            
            endClientExecution(awsRequestMetricsrequestresponse);
        }
    }

    

Returns the results of the Trusted Advisor check that has the specified check ID. Check IDs can be obtained by calling DescribeTrustedAdvisorChecks.

The response contains a TrustedAdvisorCheckResult object, which contains these three objects:

  • TrustedAdvisorCategorySpecificSummary
  • TrustedAdvisorResourceDetail
  • TrustedAdvisorResourcesSummary

In addition, the response contains these fields:

  • Status. The alert status of the check: "ok" (green), "warning" (yellow), "error" (red), or "not_available".
  • Timestamp. The time of the last refresh of the check.
  • CheckId. The unique identifier for the check.

Parameters:
describeTrustedAdvisorCheckResultRequest Container for the necessary parameters to execute the DescribeTrustedAdvisorCheckResult service method on AWSSupport.
Returns:
The response from the DescribeTrustedAdvisorCheckResult service method, as returned by AWSSupport.
Throws:
com.amazonaws.services.support.model.InternalServerErrorException
com.amazonaws.AmazonClientException If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
com.amazonaws.AmazonServiceException If an error response is returned by AWSSupport indicating either a problem with the data in the request, or a server side issue.
        ExecutionContext executionContext = createExecutionContext(describeTrustedAdvisorCheckResultRequest);
        AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
        awsRequestMetrics.startEvent(.);
        Request<DescribeTrustedAdvisorCheckResultRequestrequest = null;
        Response<DescribeTrustedAdvisorCheckResultResultresponse = null;
        
        try {
            awsRequestMetrics.startEvent(.);
            try {
                request = new DescribeTrustedAdvisorCheckResultRequestMarshaller().marshall(super.beforeMarshalling(describeTrustedAdvisorCheckResultRequest));
                // Binds the request metrics to the current request.
                request.setAWSRequestMetrics(awsRequestMetrics);
            } finally {
                awsRequestMetrics.endEvent(.);
            }
                new DescribeTrustedAdvisorCheckResultResultJsonUnmarshaller();
            JsonResponseHandler<DescribeTrustedAdvisorCheckResultResultresponseHandler =
                new JsonResponseHandler<DescribeTrustedAdvisorCheckResultResult>(unmarshaller);
            response = invoke(requestresponseHandlerexecutionContext);
            return response.getAwsResponse();
        } finally {
            
            endClientExecution(awsRequestMetricsrequestresponse);
        }
    }

    

Requests a refresh of the Trusted Advisor check that has the specified check ID. Check IDs can be obtained by calling DescribeTrustedAdvisorChecks.

The response contains a TrustedAdvisorCheckRefreshStatus object, which contains these fields:

  • Status. The refresh status of the check: "none", "enqueued", "processing", "success", or "abandoned".
  • MillisUntilNextRefreshable. The amount of time, in milliseconds, until the check is eligible for refresh.
  • CheckId. The unique identifier for the check.

Parameters:
refreshTrustedAdvisorCheckRequest Container for the necessary parameters to execute the RefreshTrustedAdvisorCheck service method on AWSSupport.
Returns:
The response from the RefreshTrustedAdvisorCheck service method, as returned by AWSSupport.
Throws:
com.amazonaws.services.support.model.InternalServerErrorException
com.amazonaws.AmazonClientException If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
com.amazonaws.AmazonServiceException If an error response is returned by AWSSupport indicating either a problem with the data in the request, or a server side issue.
        ExecutionContext executionContext = createExecutionContext(refreshTrustedAdvisorCheckRequest);
        AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
        awsRequestMetrics.startEvent(.);
        Request<RefreshTrustedAdvisorCheckRequestrequest = null;
        Response<RefreshTrustedAdvisorCheckResultresponse = null;
        
        try {
            awsRequestMetrics.startEvent(.);
            try {
                request = new RefreshTrustedAdvisorCheckRequestMarshaller().marshall(super.beforeMarshalling(refreshTrustedAdvisorCheckRequest));
                // Binds the request metrics to the current request.
                request.setAWSRequestMetrics(awsRequestMetrics);
            } finally {
                awsRequestMetrics.endEvent(.);
            }
                new RefreshTrustedAdvisorCheckResultJsonUnmarshaller();
            JsonResponseHandler<RefreshTrustedAdvisorCheckResultresponseHandler =
                new JsonResponseHandler<RefreshTrustedAdvisorCheckResult>(unmarshaller);
            response = invoke(requestresponseHandlerexecutionContext);
            return response.getAwsResponse();
        } finally {
            
            endClientExecution(awsRequestMetricsrequestresponse);
        }
    }

    

Returns the summaries of the results of the Trusted Advisor checks that have the specified check IDs. Check IDs can be obtained by calling DescribeTrustedAdvisorChecks.

The response contains an array of TrustedAdvisorCheckSummary objects.

Parameters:
describeTrustedAdvisorCheckSummariesRequest Container for the necessary parameters to execute the DescribeTrustedAdvisorCheckSummaries service method on AWSSupport.
Returns:
The response from the DescribeTrustedAdvisorCheckSummaries service method, as returned by AWSSupport.
Throws:
com.amazonaws.services.support.model.InternalServerErrorException
com.amazonaws.AmazonClientException If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
com.amazonaws.AmazonServiceException If an error response is returned by AWSSupport indicating either a problem with the data in the request, or a server side issue.
        ExecutionContext executionContext = createExecutionContext(describeTrustedAdvisorCheckSummariesRequest);
        AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
        awsRequestMetrics.startEvent(.);
        Request<DescribeTrustedAdvisorCheckSummariesRequestrequest = null;
        Response<DescribeTrustedAdvisorCheckSummariesResultresponse = null;
        
        try {
            awsRequestMetrics.startEvent(.);
            try {
                request = new DescribeTrustedAdvisorCheckSummariesRequestMarshaller().marshall(super.beforeMarshalling(describeTrustedAdvisorCheckSummariesRequest));
                // Binds the request metrics to the current request.
                request.setAWSRequestMetrics(awsRequestMetrics);
            } finally {
                awsRequestMetrics.endEvent(.);
            }
            JsonResponseHandler<DescribeTrustedAdvisorCheckSummariesResultresponseHandler =
                new JsonResponseHandler<DescribeTrustedAdvisorCheckSummariesResult>(unmarshaller);
            response = invoke(requestresponseHandlerexecutionContext);
            return response.getAwsResponse();
        } finally {
            
            endClientExecution(awsRequestMetricsrequestresponse);
        }
    }

    

Returns a list of cases that you specify by passing one or more case IDs. In addition, you can filter the cases by date by setting values for the AfterTime and BeforeTime request parameters. You can set values for the IncludeResolvedCases and IncludeCommunications request parameters to control how much information is returned.

Case data is available for 12 months after creation. If a case was created more than 12 months ago, a request for data might cause an error.

The response returns the following in JSON format:

  1. One or more CaseDetails data types.
  2. One or more NextToken values, which specify where to paginate the returned records represented by the CaseDetails objects.

Returns:
The response from the DescribeCases service method, as returned by AWSSupport.
Throws:
com.amazonaws.services.support.model.InternalServerErrorException
com.amazonaws.services.support.model.CaseIdNotFoundException
com.amazonaws.AmazonClientException If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
com.amazonaws.AmazonServiceException If an error response is returned by AWSSupport indicating either a problem with the data in the request, or a server side issue.
        return describeCases(new DescribeCasesRequest());
    }
    
    

Returns the list of severity levels that you can assign to an AWS Support case. The severity level for a case is also a field in the CaseDetails data type included in any CreateCase request.

Returns:
The response from the DescribeSeverityLevels service method, as returned by AWSSupport.
Throws:
com.amazonaws.services.support.model.InternalServerErrorException
com.amazonaws.AmazonClientException If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
com.amazonaws.AmazonServiceException If an error response is returned by AWSSupport indicating either a problem with the data in the request, or a server side issue.
    }
    
    

Takes a CaseId and returns the initial state of the case along with the state of the case after the call to ResolveCase completed.

Returns:
The response from the ResolveCase service method, as returned by AWSSupport.
Throws:
com.amazonaws.services.support.model.InternalServerErrorException
com.amazonaws.services.support.model.CaseIdNotFoundException
com.amazonaws.AmazonClientException If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
com.amazonaws.AmazonServiceException If an error response is returned by AWSSupport indicating either a problem with the data in the request, or a server side issue.
        return resolveCase(new ResolveCaseRequest());
    }
    
    

Returns the current list of AWS services and a list of service categories that applies to each one. You then use service names and categories in your CreateCase requests. Each AWS service has its own set of categories.

The service codes and category codes correspond to the values that are displayed in the Service and Category drop-down lists on the AWS Support Center Create Case page. The values in those fields, however, do not necessarily match the service codes and categories returned by the DescribeServices request. Always use the service codes and categories obtained programmatically. This practice ensures that you always have the most recent set of service and category codes.

Returns:
The response from the DescribeServices service method, as returned by AWSSupport.
Throws:
com.amazonaws.services.support.model.InternalServerErrorException
com.amazonaws.AmazonClientException If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
com.amazonaws.AmazonServiceException If an error response is returned by AWSSupport indicating either a problem with the data in the request, or a server side issue.
        return describeServices(new DescribeServicesRequest());
    }
    @Override
    public void setEndpoint(String endpoint) {
        super.setEndpoint(endpoint);
    }
    @Override
    public void setEndpoint(String endpointString serviceNameString regionIdthrows IllegalArgumentException {
        super.setEndpoint(endpointserviceNameregionId);
    }

    
Returns additional metadata for a previously executed successful, request, typically used for debugging issues where a service isn't acting as expected. This data isn't considered part of the result data returned by an operation, so it's available through this separate, diagnostic interface.

Response metadata is only cached for a limited period of time, so if you need to access this extra diagnostic information for an executed request, you should use this method to retrieve it as soon as possible after executing the request.

Parameters:
request The originally executed request
Returns:
The response metadata for the specified request, or null if none is available.
        return .getResponseMetadataForRequest(request);
    }
    private <X, Y extends AmazonWebServiceRequestResponse<X> invoke(Request<Y> request,
            HttpResponseHandler<AmazonWebServiceResponse<X>> responseHandler,
            ExecutionContext executionContext) {
        request.setEndpoint();
        request.setTimeOffset();
        AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
        AWSCredentials credentials;
        awsRequestMetrics.startEvent(.);
        try {
            credentials = .getCredentials();
        } finally {
            awsRequestMetrics.endEvent(.);
        }
        AmazonWebServiceRequest originalRequest = request.getOriginalRequest();
        if (originalRequest != null && originalRequest.getRequestCredentials() != null) {
            credentials = originalRequest.getRequestCredentials();
        }
        executionContext.setCredentials(credentials);
        JsonErrorResponseHandler errorResponseHandler = new JsonErrorResponseHandler();
        Response<X> result = .execute(requestresponseHandler,
                errorResponseHandlerexecutionContext);
        return result;
    }
}
        
New to GrepCode? Check out our FAQ X