Start line:  
End line:  

Snippet Preview

Snippet HTML Code

Stack Overflow Questions
<?xml version="1.0" encoding="UTF-8"?>

<xsd:schema
     targetNamespace="http://java.sun.com/xml/ns/j2ee"
     xmlns:j2ee="http://java.sun.com/xml/ns/j2ee"
     xmlns:xsd="http://www.w3.org/2001/XMLSchema"
     elementFormDefault="qualified"
     attributeFormDefault="unqualified"
     version="1.4">
  <xsd:annotation>
    <xsd:documentation>
      @(#)j2ee_1_4.xsds	1.43 03/09/16
    </xsd:documentation>
  </xsd:annotation>

  <xsd:annotation>
    <xsd:documentation>

      DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
      
      Copyright 2003-2009 Sun Microsystems, Inc. All rights reserved.
      
      The contents of this file are subject to the terms of either the
      GNU General Public License Version 2 only ("GPL") or the Common
      Development and Distribution License("CDDL") (collectively, the
      "License").  You may not use this file except in compliance with
      the License. You can obtain a copy of the License at
      https://glassfish.dev.java.net/public/CDDL+GPL.html or
      glassfish/bootstrap/legal/LICENSE.txt.  See the License for the
      specific language governing permissions and limitations under the
      License.
      
      When distributing the software, include this License Header
      Notice in each file and include the License file at
      glassfish/bootstrap/legal/LICENSE.txt.  Sun designates this
      particular file as subject to the "Classpath" exception as
      provided by Sun in the GPL Version 2 section of the License file
      that accompanied this code.  If applicable, add the following
      below the License Header, with the fields enclosed by brackets []
      replaced by your own identifying information:
      "Portions Copyrighted [year] [name of copyright owner]"
      
      Contributor(s):
      
      If you wish your version of this file to be governed by only the
      CDDL or only the GPL Version 2, indicate your decision by adding
      "[Contributor] elects to include this software in this
      distribution under the [CDDL or GPL Version 2] license."  If you
      don't indicate a single choice of license, a recipient has the
      option to distribute your version of this file under either the
      CDDL, the GPL Version 2 or to extend the choice of license to its
      licensees as provided above.  However, if you add GPL Version 2
      code and therefore, elected the GPL Version 2 license, then the
      option applies only if the new code is made subject to such
      option by the copyright holder.
      
    </xsd:documentation>
  </xsd:annotation>

<xsd:annotation>
<xsd:documentation>

The following definitions that appear in the common
shareable schema(s) of J2EE deployment descriptors should be
interpreted with respect to the context they are included:

Deployment Component may indicate one of the following:
    j2ee application;
    application client;
    web application;
    enterprise bean;
    resource adapter;

Deployment File may indicate one of the following:
    ear file;
    war file;
    jar file;
    rar file;

</xsd:documentation>
</xsd:annotation>

  <xsd:import namespace="http://www.w3.org/XML/1998/namespace"
	      schemaLocation="xml.xsd"/>

  <xsd:include schemaLocation=
	"j2ee_web_services_client_1_1.xsd"/>


<!-- **************************************************** -->

  <xsd:group name="descriptionGroup">
    <xsd:annotation>
      <xsd:documentation>

	This group keeps the usage of the contained description related
	elements consistent across J2EE deployment descriptors.

	All elements may occur multiple times with different languages,
	to support localization of the content.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
		   type="j2ee:descriptionType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
      <xsd:element name="display-name"
		   type="j2ee:display-nameType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
      <xsd:element name="icon"
		   type="j2ee:iconType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
    </xsd:sequence>
  </xsd:group>

<!-- **************************************************** -->

  <xsd:complexType name="descriptionType">
    <xsd:annotation>
      <xsd:documentation>

	The description type is used by a description element to
	provide text describing the parent element.  The elements
	that use this type should include any information that the
	Deployment Component's Deployment File file producer wants
	to provide to the consumer of the Deployment Component's
	Deployment File (i.e., to the Deployer). Typically, the
	tools used by such a Deployment File consumer will display
	the description when processing the parent element that
	contains the description.

	The lang attribute defines the language that the
	description is provided in. The default value is "en" (English).

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="j2ee:xsdStringType">
	<xsd:attribute ref="xml:lang"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:simpleType name="dewey-versionType">
    <xsd:annotation>
      <xsd:documentation>

	This type defines a dewey decimal which is used
	to describe versions of documents.

      </xsd:documentation>
    </xsd:annotation>

    <xsd:restriction base="xsd:decimal">
      <xsd:whiteSpace value="collapse"/>
    </xsd:restriction>

  </xsd:simpleType>

<!-- **************************************************** -->

  <xsd:complexType name="display-nameType">
    <xsd:annotation>
      <xsd:documentation>
	<![CDATA[

	  The display-name type contains a short name that is intended
	  to be displayed by tools. It is used by display-name
	  elements.  The display name need not be unique.

	  Example:

	  ...
	     <display-name xml:lang="en">Employee Self Service</display-name>

	  The value of the xml:lang attribute is "en" (English) by default.

	  ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="j2ee:string">
	<xsd:attribute ref="xml:lang"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="ejb-linkType">
    <xsd:annotation>
      <xsd:documentation>
	<![CDATA[

	  The ejb-linkType is used by ejb-link
	  elements in the ejb-ref or ejb-local-ref elements to specify
	  that an EJB reference is linked to enterprise bean.

	  The value of the ejb-link element must be the ejb-name of an
	  enterprise bean in the same ejb-jar file or in another ejb-jar
	  file in the same J2EE application unit.

	  Alternatively, the name in the ejb-link element may be
	  composed of a path name specifying the ejb-jar containing the
	  referenced enterprise bean with the ejb-name of the target
	  bean appended and separated from the path name by "#".  The
	  path name is relative to the Deployment File containing
	  Deployment Component that is referencing the enterprise
	  bean.  This allows multiple enterprise beans with the same
	  ejb-name to be uniquely identified.

	  Examples:

	      <ejb-link>EmployeeRecord</ejb-link>

	      <ejb-link>../products/product.jar#ProductEJB</ejb-link>

	  ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="j2ee:string"/>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="ejb-local-refType">
    <xsd:annotation>
      <xsd:documentation>

	The ejb-local-refType is used by ejb-local-ref elements for
	the declaration of a reference to an enterprise bean's local
	home. The declaration consists of:

	    - an optional description
	    - the EJB reference name used in the code of the Deployment
	      Component that's referencing the enterprise bean
	    - the expected type of the referenced enterprise bean
	    - the expected local home and local interfaces of the
	      referenced enterprise bean
	    - optional ejb-link information, used to specify the
	      referenced enterprise bean

      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="description"
		   type="j2ee:descriptionType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
      <xsd:element name="ejb-ref-name"
		   type="j2ee:ejb-ref-nameType"/>
      <xsd:element name="ejb-ref-type"
		   type="j2ee:ejb-ref-typeType"/>
      <xsd:element name="local-home"
		   type="j2ee:local-homeType"/>
      <xsd:element name="local"
		   type="j2ee:localType"/>
      <xsd:element name="ejb-link"
		   type="j2ee:ejb-linkType"
		   minOccurs="0"/>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="ejb-ref-nameType">
    <xsd:annotation>
      <xsd:documentation>
	<![CDATA[

	  The ejb-ref-name element contains the name of an EJB
	  reference. The EJB reference is an entry in the
	  Deployment Component's environment and is relative to the
	  java:comp/env context.  The name must be unique within the
	  Deployment Component.

	  It is recommended that name is prefixed with "ejb/".

	  Example:

	  <ejb-ref-name>ejb/Payroll</ejb-ref-name>

	  ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="j2ee:jndi-nameType"/>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="ejb-ref-typeType">
    <xsd:annotation>
      <xsd:documentation>

	The ejb-ref-typeType contains the expected type of the
	referenced enterprise bean.

	The ejb-ref-type designates a value
	that must be one of the following:

	    Entity
	    Session

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="j2ee:string">
	<xsd:enumeration value="Entity"/>
	<xsd:enumeration value="Session"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="ejb-refType">
    <xsd:annotation>
      <xsd:documentation>

	The ejb-refType is used by ejb-ref elements for the
	declaration of a reference to an enterprise bean's home. The
	declaration consists of:

	    - an optional description
	    - the EJB reference name used in the code of
	      the Deployment Component that's referencing the enterprise
	      bean
	    - the expected type of the referenced enterprise bean
	    - the expected home and remote interfaces of the referenced
	      enterprise bean
	    - optional ejb-link information, used to specify the
	      referenced enterprise bean

      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="description"
		   type="j2ee:descriptionType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
      <xsd:element name="ejb-ref-name"
		   type="j2ee:ejb-ref-nameType"/>
      <xsd:element name="ejb-ref-type"
		   type="j2ee:ejb-ref-typeType"/>

      <xsd:element name="home"
		   type="j2ee:homeType"/>
      <xsd:element name="remote"
		   type="j2ee:remoteType"/>
      <xsd:element name="ejb-link"
		   type="j2ee:ejb-linkType"
		   minOccurs="0"/>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="emptyType">
    <xsd:annotation>
      <xsd:documentation>

	This type is used to designate an empty
	element when used.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="env-entry-type-valuesType">
    <xsd:annotation>
      <xsd:documentation>
	<![CDATA[

	  This type contains the fully-qualified Java type of the
	  environment entry value that is expected by the
	  application's code.

	  The following are the legal values of env-entry-type-valuesType:

	      java.lang.Boolean
	      java.lang.Byte
	      java.lang.Character
	      java.lang.String
	      java.lang.Short
	      java.lang.Integer
	      java.lang.Long
	      java.lang.Float
	      java.lang.Double

	  Example:

	  <env-entry-type>java.lang.Boolean</env-entry-type>

	  ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="j2ee:string">
	<xsd:enumeration value="java.lang.Boolean"/>
	<xsd:enumeration value="java.lang.Byte"/>
	<xsd:enumeration value="java.lang.Character"/>
	<xsd:enumeration value="java.lang.String"/>
	<xsd:enumeration value="java.lang.Short"/>
	<xsd:enumeration value="java.lang.Integer"/>
	<xsd:enumeration value="java.lang.Long"/>
	<xsd:enumeration value="java.lang.Float"/>
	<xsd:enumeration value="java.lang.Double"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="env-entryType">
    <xsd:annotation>
      <xsd:documentation>

	The env-entryType is used to declare an application's
	environment entry. The declaration consists of an optional
	description, the name of the environment entry, and an
	optional value.  If a value is not specified, one must be
	supplied during deployment.

	It is used by env-entry elements.

      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="description"
		   type="j2ee:descriptionType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
      <xsd:element name="env-entry-name"
		   type="j2ee:jndi-nameType">
	<xsd:annotation>
	  <xsd:documentation>
	    <![CDATA[

	      The env-entry-name element contains the name of a
	      Deployment Component's environment entry.  The name
	      is a JNDI name relative to the java:comp/env
	      context.  The name must be unique within a
	      Deployment Component. The uniqueness
	      constraints must be defined within the declared
	      context.

	      Example:

	      <env-entry-name>minAmount</env-entry-name>

	      ]]>
	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>

      <xsd:element name="env-entry-type"
		   type="j2ee:env-entry-type-valuesType"/>

      <xsd:element name="env-entry-value"
		   type="j2ee:xsdStringType"
		   minOccurs="0">
	<xsd:annotation>
	  <xsd:documentation>
	    <![CDATA[

	      The env-entry-value designates the value of a
	      Deployment Component's environment entry. The value
	      must be a String that is valid for the
	      constructor of the specified type that takes a
	      single String parameter, or for java.lang.Character,
	      a single character.

	      Example:

	      <env-entry-value>100.00</env-entry-value>

	      ]]>
	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>

    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="fully-qualified-classType">
    <xsd:annotation>
      <xsd:documentation>

	The elements that use this type designate the name of a
	Java class or interface.  The name is in the form of a
	"binary name", as defined in the JLS.  This is the form
	of name used in Class.forName().  Tools that need the
	canonical name (the name used in source code) will need
	to convert this binary name to the canonical name.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="j2ee:string"/>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="generic-booleanType">
    <xsd:annotation>
      <xsd:documentation>

	This type defines four different values which can designate
	boolean values. This includes values yes and no which are
	not designated by xsd:boolean

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="j2ee:string">
	<xsd:enumeration value="true"/>
	<xsd:enumeration value="false"/>
	<xsd:enumeration value="yes"/>
	<xsd:enumeration value="no"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="homeType">
    <xsd:annotation>
      <xsd:documentation>
	<![CDATA[

	  The homeType defines the fully-qualified name of
	  an enterprise bean's home interface.

	  Example:

	      <home>com.aardvark.payroll.PayrollHome</home>

	  ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="j2ee:fully-qualified-classType"/>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="iconType">
    <xsd:annotation>
      <xsd:documentation>

	The icon type contains small-icon and large-icon elements
	that specify the file names for small and large GIF or
	JPEG icon images used to represent the parent element in a
	GUI tool.

	The xml:lang attribute defines the language that the
	icon file names are provided in. Its value is "en" (English)
	by default.

      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="small-icon" type="j2ee:pathType"
		   minOccurs="0">
	<xsd:annotation>
	  <xsd:documentation>
	    <![CDATA[

	      The small-icon element contains the name of a file
	      containing a small (16 x 16) icon image. The file
	      name is a relative path within the Deployment
	      Component's Deployment File.

	      The image may be either in the JPEG or GIF format.
	      The icon can be used by tools.

	      Example:

	      <small-icon>employee-service-icon16x16.jpg</small-icon>

	      ]]>
	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>
      <xsd:element name="large-icon" type="j2ee:pathType"
		   minOccurs="0">
	<xsd:annotation>
	  <xsd:documentation>
	    <![CDATA[

	      The large-icon element contains the name of a file
	      containing a large
	      (32 x 32) icon image. The file name is a relative
	      path within the Deployment Component's Deployment
	      File.

	      The image may be either in the JPEG or GIF format.
	      The icon can be used by tools.

	      Example:

	      <large-icon>employee-service-icon32x32.jpg</large-icon>

	      ]]>
	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>

    </xsd:sequence>

    <xsd:attribute ref="xml:lang"/>
    <xsd:attribute name="id" type="xsd:ID"/>

  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="java-identifierType">
    <xsd:annotation>
      <xsd:documentation>

	The java-identifierType defines a Java identifier.
	The users of this type should further verify that
	the content does not contain Java reserved keywords.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="j2ee:string">
	<xsd:pattern value="($|_|\p{L})(\p{L}|\p{Nd}|_|$)*"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="java-typeType">
    <xsd:annotation>
      <xsd:documentation>

	This is a generic type that designates a Java primitive
	type or a fully qualified name of a Java interface/type,
	or an array of such types.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="j2ee:string">
	<xsd:pattern value="[^\p{Z}]*"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="jndi-nameType">
    <xsd:annotation>
      <xsd:documentation>

	The jndi-nameType type designates a JNDI name in the
	Deployment Component's environment and is relative to the
	java:comp/env context.  A JNDI name must be unique within the
	Deployment Component.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="j2ee:string"/>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:group name="jndiEnvironmentRefsGroup">
    <xsd:annotation>
      <xsd:documentation>

	This group keeps the usage of the contained JNDI environment
	reference elements consistent across J2EE deployment descriptors.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="env-entry"
		   type="j2ee:env-entryType"
		   minOccurs="0" maxOccurs="unbounded"/>
      <xsd:element name="ejb-ref"
		   type="j2ee:ejb-refType"
		   minOccurs="0" maxOccurs="unbounded"/>
      <xsd:element name="ejb-local-ref"
		   type="j2ee:ejb-local-refType"
		   minOccurs="0" maxOccurs="unbounded"/>
      <xsd:group ref="j2ee:service-refGroup"/>
      <xsd:element name="resource-ref"
		   type="j2ee:resource-refType"
		   minOccurs="0" maxOccurs="unbounded"/>
      <xsd:element name="resource-env-ref"
		   type="j2ee:resource-env-refType"
		   minOccurs="0" maxOccurs="unbounded"/>
      <xsd:element name="message-destination-ref"
		   type="j2ee:message-destination-refType"
		   minOccurs="0" maxOccurs="unbounded"/>
    </xsd:sequence>
  </xsd:group>

<!-- **************************************************** -->

  <xsd:complexType name="listenerType">
    <xsd:annotation>
      <xsd:documentation>

	The listenerType indicates the deployment properties for a web
	application listener bean.

      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:group ref="j2ee:descriptionGroup"/>
      <xsd:element name="listener-class"
		   type="j2ee:fully-qualified-classType">
	<xsd:annotation>
	  <xsd:documentation>

	    The listener-class element declares a class in the
	    application must be registered as a web
	    application listener bean. The value is the fully
	    qualified classname of the listener class.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="local-homeType">
    <xsd:annotation>
      <xsd:documentation>

	The local-homeType defines the fully-qualified
	name of an enterprise bean's local home interface.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="j2ee:fully-qualified-classType"/>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="localType">
    <xsd:annotation>
      <xsd:documentation>

	The localType defines the fully-qualified name of an
	enterprise bean's local interface.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="j2ee:fully-qualified-classType"/>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="message-destination-linkType">
    <xsd:annotation>
      <xsd:documentation>

	The message-destination-linkType is used to link a message
	destination reference or message-driven bean to a message
	destination.

	The Assembler sets the value to reflect the flow of messages
	between producers and consumers in the application.

	The value must be the message-destination-name of a message
	destination in the same Deployment File or in another
	Deployment File in the same J2EE application unit.

	Alternatively, the value may be composed of a path name
	specifying a Deployment File containing the referenced
	message destination with the message-destination-name of the
	destination appended and separated from the path name by
	"#". The path name is relative to the Deployment File
	containing Deployment Component that is referencing the
	message destination.  This allows multiple message
	destinations with the same name to be uniquely identified.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="j2ee:string"/>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="message-destination-refType">
    <xsd:annotation>
      <xsd:documentation>
	<![CDATA[

	  The message-destination-ref element contains a declaration
	  of Deployment Component's reference to a message destination
	  associated with a resource in Deployment Component's
	  environment. It consists of:

		  - an optional description
		  - the message destination reference name
		  - the message destination type
		  - a specification as to whether the
		    destination is used for
		    consuming or producing messages, or both
		  - a link to the message destination

	  Examples:

	  <message-destination-ref>
		  <message-destination-ref-name>jms/StockQueue
		  </message-destination-ref-name>
		  <message-destination-type>javax.jms.Queue
		  </message-destination-type>
		  <message-destination-usage>Consumes
		  </message-destination-usage>
		  <message-destination-link>CorporateStocks
		  </message-destination-link>
	  </message-destination-ref>

	  ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
		   type="j2ee:descriptionType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
      <xsd:element name="message-destination-ref-name"
		   type="j2ee:jndi-nameType">
	<xsd:annotation>
	  <xsd:documentation>

	    The message-destination-ref-name element specifies
	    the name of a message destination reference; its
	    value is the environment entry name used in
	    Deployment Component code.  The name is a JNDI name
	    relative to the java:comp/env context and must be
	    unique within an ejb-jar (for enterprise beans) or a
	    Deployment File (for others).

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>
      <xsd:element name="message-destination-type"
		   type="j2ee:message-destination-typeType"/>
      <xsd:element name="message-destination-usage"
		   type="j2ee:message-destination-usageType"/>
      <xsd:element name="message-destination-link"
		   type="j2ee:message-destination-linkType"
		   minOccurs="0"/>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>

  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="message-destination-typeType">
    <xsd:annotation>
      <xsd:documentation>
	<![CDATA[

	  The message-destination-typeType specifies the type of
	  the destination. The type is specified by the Java interface
	  expected to be implemented by the destination.

	  Example:

	    <message-destination-type>javax.jms.Queue
	    </message-destination-type>

	  ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="j2ee:fully-qualified-classType"/>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="message-destination-usageType">
    <xsd:annotation>
      <xsd:documentation>

	The message-destination-usageType specifies the use of the
	message destination indicated by the reference.  The value
	indicates whether messages are consumed from the message
	destination, produced for the destination, or both.  The
	Assembler makes use of this information in linking producers
	of a destination with its consumers.

	The value of the message-destination-usage element must be
	one of the following:
	    Consumes
	    Produces
	    ConsumesProduces

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="j2ee:string">
	<xsd:enumeration value="Consumes"/>
	<xsd:enumeration value="Produces"/>
	<xsd:enumeration value="ConsumesProduces"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="message-destinationType">
    <xsd:annotation>
      <xsd:documentation>
	<![CDATA[

	  The message-destinationType specifies a message
	  destination. The logical destination described by this
	  element is mapped to a physical destination by the Deployer.

	  The message destination element contains:

		  - an optional description
		  - an optional display-name
		  - an optional icon
		  - a message destination name which must be unique
		    among message destination names within the same
		    Deployment File.

	  Example:

	  <message-destination>
		  <message-destination-name>CorporateStocks
		  </message-destination-name>
	  </message-destination>

	  ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:group ref="j2ee:descriptionGroup"/>
      <xsd:element name="message-destination-name"
		   type="j2ee:string">
	<xsd:annotation>
	  <xsd:documentation>

	    The message-destination-name element specifies a
	    name for a message destination.  This name must be
	    unique among the names of message destinations
	    within the Deployment File.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="param-valueType">
    <xsd:annotation>
      <xsd:documentation>

	This type is a general type that can be used to declare
	parameter/value lists.

      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="description"
		   type="j2ee:descriptionType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
      <xsd:element name="param-name"
		   type="j2ee:string">
	<xsd:annotation>
	  <xsd:documentation>

	    The param-name element contains the name of a
	    parameter.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>

      <xsd:element name="param-value"
		   type="j2ee:xsdStringType">
	<xsd:annotation>
	  <xsd:documentation>

	    The param-value element contains the value of a
	    parameter.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="pathType">
    <xsd:annotation>
      <xsd:documentation>

	The elements that use this type designate either a relative
	path or an absolute path starting with a "/".

	In elements that specify a pathname to a file within the
	same Deployment File, relative filenames (i.e., those not
	starting with "/") are considered relative to the root of
	the Deployment File's namespace.  Absolute filenames (i.e.,
	those starting with "/") also specify names in the root of
	the Deployment File's namespace.  In general, relative names
	are preferred.  The exception is .war files where absolute
	names are preferred for consistency with the Servlet API.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="j2ee:string"/>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="remoteType">
    <xsd:annotation>
      <xsd:documentation>
	<![CDATA[

	  The remote element contains the fully-qualified name
	  of the enterprise bean's remote interface.

	  Example:

	      <remote>com.wombat.empl.EmployeeService</remote>

	  ]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="j2ee:fully-qualified-classType"/>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="res-authType">
    <xsd:annotation>
      <xsd:documentation>

	The res-authType specifies whether the Deployment Component
	code signs on programmatically to the resource manager, or
	whether the Container will sign on to the resource manager
	on behalf of the Deployment Component. In the latter case,
	the Container uses information that is supplied by the
	Deployer.

	The value must be one of the two following:

	    Application
	    Container

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="j2ee:string">
	<xsd:enumeration value="Application"/>
	<xsd:enumeration value="Container"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="res-sharing-scopeType">
    <xsd:annotation>
      <xsd:documentation>

	The res-sharing-scope type specifies whether connections
	obtained through the given resource manager connection
	factory reference can be shared. The value, if specified,
	must be one of the two following:

	    Shareable
	    Unshareable

	The default value is Shareable.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="j2ee:string">
	<xsd:enumeration value="Shareable"/>
	<xsd:enumeration value="Unshareable"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="resource-env-refType">
    <xsd:annotation>
      <xsd:documentation>
	<![CDATA[

	  The resource-env-refType is used to define
	  resource-env-type elements.  It contains a declaration of a
	  Deployment Component's reference to an administered object
	  associated with a resource in the Deployment Component's
	  environment.  It consists of an optional description, the
	  resource environment reference name, and an indication of
	  the resource environment reference type expected by the
	  Deployment Component code.

	  Example:

	  <resource-env-ref>
	      <resource-env-ref-name>jms/StockQueue
	      </resource-env-ref-name>
	      <resource-env-ref-type>javax.jms.Queue
	      </resource-env-ref-type>
	  </resource-env-ref>

	  ]]>
      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="description"
		   type="j2ee:descriptionType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
      <xsd:element name="resource-env-ref-name"
		   type="j2ee:jndi-nameType">
	<xsd:annotation>
	  <xsd:documentation>

	    The resource-env-ref-name element specifies the name
	    of a resource environment reference; its value is
	    the environment entry name used in
	    the Deployment Component code.  The name is a JNDI
	    name relative to the java:comp/env context and must
	    be unique within a Deployment Component.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>

      <xsd:element name="resource-env-ref-type"
		   type="j2ee:fully-qualified-classType">
	<xsd:annotation>
	  <xsd:documentation>

	    The resource-env-ref-type element specifies the type
	    of a resource environment reference.  It is the
	    fully qualified name of a Java language class or
	    interface.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>

    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="resource-refType">
    <xsd:annotation>
      <xsd:documentation>
	<![CDATA[

	  The resource-refType contains a declaration of a
	  Deployment Component's reference to an external resource. It
	  consists of an optional description, the resource manager
	  connection factory reference name, the indication of the
	  resource manager connection factory type expected by the
	  Deployment Component code, the type of authentication
	  (Application or Container), and an optional specification of
	  the shareability of connections obtained from the resource
	  (Shareable or Unshareable).

	  Example:

	  <resource-ref>
	      <res-ref-name>jdbc/EmployeeAppDB</res-ref-name>
	      <res-type>javax.sql.DataSource</res-type>
	      <res-auth>Container</res-auth>
	      <res-sharing-scope>Shareable</res-sharing-scope>
	  </resource-ref>

	  ]]>
      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="description"
		   type="j2ee:descriptionType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
      <xsd:element name="res-ref-name"
		   type="j2ee:jndi-nameType">
	<xsd:annotation>
	  <xsd:documentation>

	    The res-ref-name element specifies the name of a
	    resource manager connection factory reference.
	    The name is a JNDI name relative to the
	    java:comp/env context.
	    The name must be unique within a Deployment File.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>

      <xsd:element name="res-type"
		   type="j2ee:fully-qualified-classType">
	<xsd:annotation>
	  <xsd:documentation>

	    The res-type element specifies the type of the data
	    source. The type is specified by the fully qualified
	    Java language class or interface
	    expected to be implemented by the data source.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>

      <xsd:element name="res-auth"
		   type="j2ee:res-authType"/>

      <xsd:element name="res-sharing-scope"
		   type="j2ee:res-sharing-scopeType"
		   minOccurs="0"/>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="role-nameType">
    <xsd:annotation>
      <xsd:documentation>

	The role-nameType designates the name of a security role.

	The name must conform to the lexical rules for a token.

      </xsd:documentation>
    </xsd:annotation>

    <xsd:simpleContent>
      <xsd:restriction base="j2ee:string"/>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="run-asType">
    <xsd:annotation>
      <xsd:documentation>

	The run-asType specifies the run-as identity to be
	used for the execution of a component. It contains an
	optional description, and the name of a security role.

      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="description"
		   type="j2ee:descriptionType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
      <xsd:element name="role-name"
		   type="j2ee:role-nameType"/>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="security-role-refType">
    <xsd:annotation>
      <xsd:documentation>

	The security-role-refType contains the declaration of a
	security role reference in a component's or a
	Deployment Component's code. The declaration consists of an
	optional description, the security role name used in the
	code, and an optional link to a security role. If the
	security role is not specified, the Deployer must choose an
	appropriate security role.

      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="description"
		   type="j2ee:descriptionType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
      <xsd:element name="role-name"
		   type="j2ee:role-nameType">
	<xsd:annotation>
	  <xsd:documentation>

	    The value of the role-name element must be the String used
	    as the parameter to the
	    EJBContext.isCallerInRole(String roleName) method or the
	    HttpServletRequest.isUserInRole(String role) method.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>

      <xsd:element name="role-link"
		   type="j2ee:role-nameType"
		   minOccurs="0">
	<xsd:annotation>
	  <xsd:documentation>

	    The role-link element is a reference to a defined
	    security role. The role-link element must contain
	    the name of one of the security roles defined in the
	    security-role elements.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="security-roleType">
    <xsd:annotation>
      <xsd:documentation>
	<![CDATA[

	  The security-roleType contains the definition of a security
	  role. The definition consists of an optional description of the
	  security role, and the security role name.

	  Example:

	      <security-role>
	      <description>
		  This role includes all employees who are authorized
		  to access the employee service application.
	      </description>
	      <role-name>employee</role-name>
	      </security-role>

	  ]]>
      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="description"
		   type="j2ee:descriptionType"
		   minOccurs="0"
		   maxOccurs="unbounded"/>
      <xsd:element name="role-name"
		   type="j2ee:role-nameType"/>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="string">
    <xsd:annotation>
      <xsd:documentation>

	This is a special string datatype that is defined by J2EE as
	a base type for defining collapsed strings. When schemas
	require trailing/leading space elimination as well as
	collapsing the existing whitespace, this base type may be
	used.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="xsd:token">
	<xsd:attribute name="id" type="xsd:ID"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="true-falseType">
    <xsd:annotation>
      <xsd:documentation>

	This simple type designates a boolean with only two
	permissible values

	- true
	- false

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="j2ee:xsdBooleanType">
	<xsd:pattern value="(true|false)"/>
      </xsd:restriction>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="url-patternType">
    <xsd:annotation>
      <xsd:documentation>

	The url-patternType contains the url pattern of the mapping.
	It must follow the rules specified in Section 11.2 of the
	Servlet API Specification. This pattern is assumed to be in
	URL-decoded form and must not contain CR(#xD) or LF(#xA).
	If it contains those characters, the container must inform
	the developer with a descriptive error message.
	The container must preserve all characters including whitespaces.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="xsd:string"/>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="xsdAnyURIType">
    <xsd:annotation>
      <xsd:documentation>

	This type adds an "id" attribute to xsd:anyURI.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="xsd:anyURI">
	<xsd:attribute name="id" type="xsd:ID"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="xsdBooleanType">
    <xsd:annotation>
      <xsd:documentation>

	This type adds an "id" attribute to xsd:boolean.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="xsd:boolean">
	<xsd:attribute name="id" type="xsd:ID"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="xsdIntegerType">
    <xsd:annotation>
      <xsd:documentation>

	This type adds an "id" attribute to xsd:integer.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="xsd:integer">
	<xsd:attribute name="id" type="xsd:ID"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="xsdNMTOKENType">
    <xsd:annotation>
      <xsd:documentation>

	This type adds an "id" attribute to xsd:NMTOKEN.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="xsd:NMTOKEN">
	<xsd:attribute name="id" type="xsd:ID"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="xsdNonNegativeIntegerType">
    <xsd:annotation>
      <xsd:documentation>

	This type adds an "id" attribute to xsd:nonNegativeInteger.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="xsd:nonNegativeInteger">
	<xsd:attribute name="id" type="xsd:ID"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="xsdPositiveIntegerType">
    <xsd:annotation>
      <xsd:documentation>

	This type adds an "id" attribute to xsd:positiveInteger.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="xsd:positiveInteger">
	<xsd:attribute name="id" type="xsd:ID"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="xsdQNameType">
    <xsd:annotation>
      <xsd:documentation>

	This type adds an "id" attribute to xsd:QName.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="xsd:QName">
	<xsd:attribute name="id" type="xsd:ID"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="xsdStringType">
    <xsd:annotation>
      <xsd:documentation>

	This type adds an "id" attribute to xsd:string.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:extension base="xsd:string">
	<xsd:attribute name="id" type="xsd:ID"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>

</xsd:schema>

New to GrepCode? Check out our FAQ X